Page History
...
One of the first questions to ask yourself is the format you wish to utilize for your AIPs.
There are two options:
- DSpace AIP Format (METS-based) (default) - This is the same AIP format utilized by the DSpace AIP Backup and Restore feature, so it is 100% compatible with that existing feature. In fact when using this format, the Replication Task Suite just "wraps" calls to the AIP Backup and Restore feature itself.
- BagIt AIP Format - This is a new AIP format provided by the Replication Task Suite. It generates AIPs in the BagIt File Packaging Format. Institutions which already are familiar with BagIt or use it elsewhere may find this format preferrable.
Configuring usage of DSpace default
...
AIP Format (METS-based)
This section goes through the steps of configuring the Replication Suite to use METS-based AIPsthe default DSpace AIP format, which utilizes METS packaging.
Wiki Markup *General Curation Configuration:* First, in your {{\[dspace\]/config/modules/curate.cfg}} you will want to enable & configure the METS-based replication tasks. (NOTE: there is a sample {{curate.cfg}} file provided in {{\[dspace-replicate\]/config/modules/curate.cfg}} which is pre-configured to use METS-based AIPs).
- Enable the Replication Tasks: In the list of "Task Class implementations" (
plugin.named.org.dspace.curate.CurationTask
), add the following.
REMEMBER to add a comma and backslash (", \") after each line (except the final line).Code Block plugin.named.org.dspace.curate.CurationTask = \ ... (YOUR EXISTING TASKS) ... , \ org.dspace.ctask.replicate.EstimateAIPSize = estaipsize, \ org.dspace.ctask.replicate.ReadOdometer = readodometer, \ org.dspace.ctask.replicate.TransmitAIP = transmitaip, \ org.dspace.ctask.replicate.VerifyAIP = verifyaip, \ org.dspace.ctask.replicate.FetchAIP = fetchaip, \ org.dspace.ctask.replicate.CompareWithAIP = auditaip, \ org.dspace.ctask.replicate.RemoveAIP = removeaip, \ org.dspace.ctask.replicate.METSRestoreFromAIP = restorefromaip, \ org.dspace.ctask.replicate.METSRestoreFromAIP = replacewithaip, \ org.dspace.ctask.replicate.METSRestoreFromAIP = restorekeepexisting, \ org.dspace.ctask.replicate.METSRestoreFromAIP = restoresinglefromaip, \ org.dspace.ctask.replicate.METSRestoreFromAIP = replacesinglewithaip
- Give Each Task a Human-Friendly Task Name: Under the
ui.tasknames
setting, give each of the above Tasks a human-friendy name. Here are some recommended values, but you are welcome to tweak them.
REMEMBER to add a comma and backslash (", \") after each line (except the final line).Code Block ui.tasknames = \ ... (YOUR EXISTING TASK NAMES) ... , \ estaipsize = Estimate AIP(s) Size, \ readodometer = Read Odometer, \ transmitaip = Transmit AIP(s) to Storage, \ verifyaip = Verify AIP(s) exist in Storage, \ fetchaip = Fetch AIP(s) from Storage, \ auditaip = Audit/Compare against AIP(s), \ removeaip = Remove AIP(s) from Storage, \ restorefromaip = Restore Missing Object(s) from AIP(s), \ replacewithaip = Replace Existing Object(s) with AIP(s), \ restorekeepexisting = Restore Missing Object(s) but Keep Existing Objects,\ restoresinglefromaip = Restore Single Object from AIP, \ replacesinglewithaip = Replace Single Object with AIP
- Optionally Create a Task Group: Finally, if you'd like to create a Task Group for these tasks, you can create a group named "replicate" and add them all to it. The below is just an example for how you may wish to set the
ui.taskgroups
andui.taskgroup.*
settings. It creates two Task Groups: (1) a "General Purpose Tasks" group for a few default DSpace Curation Tasks, and (2) a "Replication Suite Tasks" group for all these new Replication tasks.Code Block # Tasks may be organized into named groups which display together in UI drop-downs ui.taskgroups = \ general = General Purpose Tasks, replicate = Replication Suite Tasks # Group membership is defined using comma-separated lists of task names, one property per group ui.taskgroup.general = profileformats, requiredmetadata, checklinks ui.taskgroup.replicate = estaipsize, readodometer, transmitaip, verifyaip, fetchaip, auditaip, removeaip, restorefromaip, replacewithaip, restorekeepexisting, restoresinglefromaip, replacesinglewithaip
- Enable the Replication Tasks: In the list of "Task Class implementations" (
Wiki Markup *Replication Suite Configuration*: Next, in your {{\[dspace\]/config/modules/replicate.cfg}} you will want to ensure it is setup to properly use METS-based AIPs. Under the "AIP Packaging Settings" you'll want the following settings enabled:
Code Block # Package type. Permitted values: 'mets', 'bagit' # mets = Generate default DSpace AIPs as described in: https://wiki.duraspace.org/display/DSDOC18/AIP+Backup+and+Restore # bagit = Generate AIPs based on the BagIt packaging format: https://wiki.ucop.edu/display/Curation/BagIt packer.pkgtype = mets # Format of package compression. Permitted values: 'zip' or 'tgz' # for 'mets' packages, only 'zip' is supported packer.archfmt = zip # Whether or not the name packages with a DSpace type prefix. # When 'true', package files are named [type]@[handle].[format] (e.g. ITEM@123456789-1.zip) # When 'false', package files are named [handle].[format] (e.g. 123456789-1.zip) # Defaults to 'true'. For 'mets' packages, this must be 'true'. packer.typeprefix = true
Wiki Markup *Optionally tweak the AIP Restore/Replace settings:* Optionally, you can decide to tweak the way AIPs are restored or replaced (using [DSDOC18:AIP Backup and Restore]). These settings normally *do not need to be tweaked*, but are available in the {{\[dspace\]/config/modules/replicate-mets.cfg}} configuration file.
Configuring usage of DSpace BagIt AIP Format
This section goes through the steps of configuring the Replication Suite to use BagIt-based AIPs. For more information on the BagIt packaging format, see: https://wiki.ucop.edu/display/Curation/BagIt
...
Overview
Content Tools