Page History

...

The "rateLimiter" sub-section can be used to protect against a DOS (denial of service) attack when the UI is processed on the server side (i.e. server-side rendering).  Default settings are usually OK. In Angular, server-side rendering occurs to support better Search Engine Optimization (SEO), as well as to support clients which cannot use Javascript.   See also Angular's docs on Server-side rendering.

REST API Settings

The "rest" (REST API) section defines which REST API the UI will use. The REST settings MUST correspond to the primary URL of the backend. Usually, this means they must be kept in sync
with the value of dspace.server.url in the backend's local.cfg

This example is valid if your Backend is publicly available at https://api.mydspace.edu/server/  . Keep in mind that the "port" must always be specified even if it's a standard port (i.e. port 80 for HTTP and port 443 for HTTPS).

Sub-path in frontend URL:  When using a subpath (nameSpace) in your UI server base URL (e.g. "http://localhost:4000/mysite/" instead of "http://localhost:4000/"), you must make sure that the URL without  the subpath is added to the rest.cors.allowed-origins  list in [dspace]/config/modules/rest.cfg  or the local.cfg  override. The default value used for this configuration assumes that Origin and DSpace URL are identical, but CORS origins do not contain a subpath. Without this change you will see CORS policy errors preventing communication between the frontend and backend servers.

REST API Settings

The "rest" (REST API) section defines which REST API the UI will use. The REST settings MUST correspond to the primary URL of the backend. Usually, this means they must be kept in sync
with the value of dspace.server.url in the backend's local.cfg

This example is valid if your Backend is publicly available at https://api.mydspace.edu/server/  . Keep in mind that the "port" must always be specified even if it's a standard port (i.e. port 80 for HTTP and port 443 for HTTPS).

rest

rest:
  ssl: true
  host: api.mydspace.edu
  port: 443
  # NOTE: Space is capitalized because 'namespace' is a reserved string in TypeScript
  nameSpace: /server

...

auth:
  # Authentication UI settings
  ui:
    # the amount of time before the idle warning is shown
    timeUntilIdle: 900000 # 15 minutes
    # the amount of time the user has to react after the idle warning is shown before they are logged out.
    idleGracePeriod: 300000 # 5 minutes
  # Authentication REST settings
  rest:
      # If the rest token expires in less than this amount of time, it will be refreshed automatically.
    # This is independent from the idle warning.
 Defaults to automatic refresh when timeLeftBeforeTokenRefresh: 120000 # 2 minutesthe token will
    # expire within 2 minutes. Because token expires after 30 minutes by default, this means automatic
    # refresh would occur every ~28 minutes.
    timeLeftBeforeTokenRefresh: 120000 # 2 minutes

Form Settings

The "form" section provides basic settings for any forms displayed in the UI. At this time, these settings only include a validatorMap, which is not necessary to modify for most sites

...

item:
  edit:
    undoTimeout: 10000 # 10 seconds

collection:
  edit:
    undoTimeout: 10000 # 10 seconds

Item Access Labels 

...

Item access labels allow to display for each item in search results if it is Open Access, under embargo, restricted or metadata only (does not contain any file/bitstream). This feature is disabled by default, but can be enabled in your config.*.yml.

Code Block
language yml title config.*.yml
# Item Config item: # Show the item access status label in items lists (default=false) showAccessStatuses: true

Item Page Settings

The "item" section allows you to configure the behavior of the Item pages. 

...

NOTE: The "pageSize" configuration will always round to the closest "pageSizeOptions" value listed in "page-component-options.model.ts"

...

Community Page Settings

The "themescommunity" section allows you to configure which theme(s) are enabled for your DSpace site (with the default theme being the "dspace" one).  You can enable a single theme across all pages, and/or enable specific alternative themes based on a specific Community, Collection or Item (by UUID or Handle), or based on a Regex match of a URL pattern.  This allows you fine grained control over how your site looks, including the ability to customize it per Community or Collection or even per specific pages in the site.  See User Interface Customization for details of how to create a new, custom theme.the behavior of the Community pages (Path: /community/[uuid]).

community:
  # Search tab config
  searchSection:
    # When set to "true", the search filter sidebar will be displayed on the "Search" tab
    showSidebar: true

Collection Page Settings

The "collection" section allows you to configure the behavior of the Collection pages (Path: /collection/[uuid]).

collection:
  # Search tab config
  searchSection:
    # When set to "true", the search filter sidebar will be displayed on the "Search" tab
    showSidebar: true

Theme Settings

The "themes" section allows you to configure which theme(s) are enabled for your DSpace site (with the default theme being the "dspace" one).  You can enable a single theme across all pages, and/or enable specific alternative themes based on a specific Community, Collection or Item (by UUID or Handle), or based on a Regex match of a URL pattern.  This allows you fine grained control over how your site looks, including the ability to customize it per Community or Collection or even per specific pages in the site.  See User Interface Customization for details of how to create a new, custom theme.

themes:
  # Add additional themes here. In the case where multiple themes match a route, the first one
  # in this list will get priority. It is advisable to always have a theme that matches
  # every route as the last one
  #
  # # A theme with a handle property will match the community, collection or item with the given
  # # handle, and all collections and

themes:
  # Add additional themes here. In the case where multiple themes match a route, the first one
  # in this list will get priority. It is advisable to always have a theme that matches
  # every route as the last one
  #
  # # A theme with a handle property will match the community, collection or item with the given
  # # handle, and all collections and/or items within it
  # - name: 'custom',
  #   handle: '10673/1233'
  #
  # # A theme with a regex property will match the route using a regular expression. If it
  # # matches the route for a community or collection it will also apply to all collections
  # # and/or items within it
  # - name: 'custom',
  #   regexhandle: 'collections\/e8043bc2.*10673/1233'
  #
  # # A theme with a uuidregex property will match the community,route collectionusing ora itemregular withexpression. theIf givenit
  # # ID, and matches the route for a community or collection it will also apply to all collections
  # # and/or items within it
  # - name: 'custom',
  #   uuid: '0958c910-2037-regex: 'collections\/e8043bc2.*'
  #
  # # A theme with a uuid property will match the community, collection or item with the given
  # # ID, and all collections and/or items within it
  # - name: 'custom',
  #   uuid: '0958c910-2037-42a9-81c7-dca80e3892b4'
  #
  # # The extends property specifies an ancestor theme (by name). Whenever a themed component is not found
  # # in the current theme, its ancestor theme(s) will be checked recursively before falling back to default.
  # - name: 'custom-A',
  #   extends: 'custom-B',
  #   # Any of the matching properties above can be used
  #   handle: '10673/34'
  #
  # - name: 'custom-B',
  #   extends: 'custom',
  #   handle: '10673/12'
  #
  # # A theme with only a name will match every route
  # name: 'custom'
  #
  # # This theme will use the default bootstrap styling for DSpace components
  # - name: BASE_THEME_NAME
  #
  - name: dspace
    # Whenever this theme is active, the following tags will be injected into the <head> of the page.
    # Example use case: set the favicon based on the active theme. 
    headTags:
    - tagName: link
      attributes:
        rel: icon
        href: assets/dspace/images/favicons/favicon.ico
        sizes: any
    - tagName: link
      attributes:
        rel: icon
        href: assets/dspace/images/favicons/favicon.svg
        type: image/svg+xml
    - tagName: link
      attributes:
        rel: apple-touch-icon
        href: assets/dspace/images/favicons/apple-touch-icon.png
    - tagName: link
      attributes:
        rel: manifest
        href: assets/dspace/images/favicons/manifest.webmanifest

Bundle Settings

The "bundle" section allows you to customize which bundles will be displayed as suggestions whenever you upload a new Bitstream:

bundle:
  standardBundles: [ ORIGINAL, THUMBNAIL, LICENSE ]

Media Viewer Settings

The DSpace UI comes with a basic, out-of-the-box Media Viewer (disabled by default).  This media viewer can support any files which have a MIME Type that begins with either "image/*", "video/*", or "audio/*".

...

HTML is a part of markdown, so enabling the markdown option will ensure HTML tags in metadata field values get rendered as well

# Whether to enable Markdown (https://commonmark.org/) and MathJax (https://www.mathjax.org/)
# display in supported metadata fields. By default, only dc.description.abstract is supported.
markdown:
  enabled: false
  mathjax: false

...

When using hierarchical controlled vocabularies (e.g. SRSC as described in Authority Control of Metadata Values), it's possible to search using the controlled vocabulary hierarchy via the search filters.  To enable this feature, you must specify the filter and vocabulary to enable as follows:

# Which vocabularies should be used for which search filters
# and whether to show the filter in the search sidebar
# Take a look at the filter-vocabulary-config.ts file for documentation on how the options are obtained
vocabularies:
  - filter: 'subject'
    vocabulary: 'srsc'
    enabled: true

...

When this feature is enabled, you should see a "Browse [filter] tree" link in the search filter on the search results page (and anywhere search filters are shown).  This "Browse [filter] tree" link will allow you to select a search filter from within the configured hierarchical vocabulary.

Search settings

The "search" section allows you to customize how the Search page works (Path: /search)

search:
  # Settings to enable/disable or configure Advanced Search filters.
  advancedFilters:
    enabled: false
    # List of filters to enable in "Advanced Search" dropdown
    filter: [ 'title', 'author', 'subject', 'entityType' ]

Debug Settings

The "debug" property allows you to turn on debugging in the Angular UI.  When enabled, your environment and all Redux actions/transfers are logged to the console.  This is only ever needed if you are debugging a tricky issue.

...