Page History
...
Info | ||
---|---|---|
| ||
More information on the Replication Task Suite is available from the following webinars / screencasts:
|
...
- General Curation Configuration: First, in your
[dspace]/config/modules/curate.cfg
you will want to enable & configure the METS-based replication tasks. (NOTE: there is a samplecurate.cfg
file provided in https://github.com/DSpace/dspace-replicate/tree/master/config/modules which is pre-configured to use METS-based AIPs).Enable the Replication Tasks: In the list of "Task Class implementations" (
plugin.named.org.dspace.curate.CurationTask
), add the following.
REMEMBER to add a comma and backslash (", \") after each line (except the final line).Code Block plugin.named.org.dspace.curate.CurationTask = \ ... (YOUR EXISTING TASKS) ... , \ org.dspace.ctask.replicate.EstimateAIPSize = estaipsize, \ org.dspace.ctask.replicate.ReadOdometer = readodometer, \ org.dspace.ctask.replicate.TransmitAIP = transmitaip, \ org.dspace.ctask.replicate.TransmitSingleAIP = transmitsingleaip, \ org.dspace.ctask.replicate.VerifyAIP = verifyaip, \ org.dspace.ctask.replicate.FetchAIP = fetchaip, \ org.dspace.ctask.replicate.CompareWithAIP = auditaip, \ org.dspace.ctask.replicate.RemoveAIP = removeaip, \ org.dspace.ctask.replicate.METSRestoreFromAIP = restorefromaip, \ org.dspace.ctask.replicate.METSRestoreFromAIP = replacewithaip, \ org.dspace.ctask.replicate.METSRestoreFromAIP = restorekeepexisting, \ org.dspace.ctask.replicate.METSRestoreFromAIP = restoresinglefromaip, \ org.dspace.ctask.replicate.METSRestoreFromAIP = replacesinglewithaip
Give Each Task a Human-Friendly Task Name: Under the
ui.tasknames
setting, give each of the above Tasks a human-friendy name. Here are some recommended values, but you are welcome to tweak them.
REMEMBER to add a comma and backslash (", \") after each line (except the final line).Code Block ui.tasknames = \ ... (YOUR EXISTING TASK NAMES) ... , \ estaipsize = Estimate Storage Space for AIP(s), \ readodometer = Read Odometer, \ transmitaip = Transmit AIP(s) to Storage, \ verifyaip = Verify AIP(s) exist in Storage, \ fetchaip = Fetch AIP(s) from Storage, \ auditaip = Audit against AIP(s), \ removeaip = Remove AIP(s) from Storage, \ restorefromaip = Restore Missing Object(s) from AIP(s), \ replacewithaip = Replace Existing Object(s) with AIP(s), \ restorekeepexisting = Restore Missing Object(s) but Keep Existing Objects,\ restoresinglefromaip = Restore Single Object from AIP, \ replacesinglewithaip = Replace Single Object with AIP
Optionally Create a Task Group: Finally, if you'd like to create a Task Group for these tasks, you can create a group named "replicate" and add them all to it. The below is just an example for how you may wish to set the
ui.taskgroups
andui.taskgroup.*
settings. It creates two Task Groups: (1) a "General Purpose Tasks" group for a few default DSpace Curation Tasks, and (2) a "Replication Suite Tasks" group for all these new Replication tasks.Code Block # Tasks may be organized into named groups which display together in UI drop-downs ui.taskgroups = \ general = General Purpose Tasks, \ replicate = Replication Suite Tasks # Group membership is defined using comma-separated lists of task names, one property per group ui.taskgroup.general = profileformats, requiredmetadata, checklinks ui.taskgroup.replicate = estaipsize, readodometer, transmitaip, verifyaip, fetchaip, auditaip, removeaip, restorefromaip, replacewithaip, restorekeepexisting, restoresinglefromaip, replacesinglewithaip
Replication Suite Configuration: Next, in your
[dspace]/config/modules/replicate.cfg
you will want to ensure it is setup to properly use METS-based AIPs. Under the "AIP Packaging Settings" you'll want the following settings enabled:Code Block # Package type. Permitted values: 'mets', 'bagit' # mets = Generate default DSpace AIPs as described in: https://wiki.duraspace.org/display/DSDOC18/AIP+Backup+and+Restore # bagit = Generate AIPs based on the BagIt packaging format: https://wiki.ucop.edu/display/Curation/BagIt packer.pkgtype = mets # Format of package compression. Permitted values: 'zip' or 'tgz' # for 'mets' packages, only 'zip' is supported packer.archfmt = zip # Whether or not the name packages with a DSpace type prefix. # When 'true', package files are named [type]@[handle].[format] (e.g. ITEM@123456789-1.zip) # When 'false', package files are named [handle].[format] (e.g. 123456789-1.zip) # Defaults to 'true'. For 'mets' packages, this must be 'true'. packer.typeprefix = true
- Optionally tweak the AIP Restore/Replace settings: Optionally, you can decide to tweak the way AIPs are restored or replaced (using AIP Backup and Restore options). These settings normally should not need to be tweaked, but are available in the
[dspace]/config/modules/replicate-mets.cfg
configuration file. See that configuration file for more details.
...
- General Curation Configuration: First, in your
[dspace]/config/modules/curate.cfg
you will want to enable & configure the BagIt-based replication tasks. (NOTE: there is a samplecurate.cfg
file provided in https://github.com/DSpace/dspace-replicate/tree/master/config/modules which provides example settings, though they are all commented out by default).Enable the Replication Tasks: In the list of "Task Class implementations" (
plugin.named.org.dspace.curate.CurationTask
), add the following.
REMEMBER to add a comma and backslash (", \") after each line (except the final line).Code Block plugin.named.org.dspace.curate.CurationTask = \ ... (YOUR EXISTING TASKS) ... , \ org.dspace.ctask.replicate.EstimateAIPSize = estaipsize, \ org.dspace.ctask.replicate.ReadOdometer = readodometer, \ org.dspace.ctask.replicate.TransmitAIP = transmitaip, \ org.dspace.ctask.replicate.VerifyAIP = verifyaip, \ org.dspace.ctask.replicate.FetchAIP = fetchaip, \ org.dspace.ctask.replicate.CompareWithAIP = auditaip, \ org.dspace.ctask.replicate.RemoveAIP = removeaip, \ org.dspace.ctask.replicate.BagItRestoreFromAIP = restorefromaip, \ org.dspace.ctask.replicate.BagItReplaceWithAIP = replacewithaip
Give Each Task a Human-Friendly Task Name: Under the
ui.tasknames
setting, give each of the above Tasks a human-friendy name. Here are some recommended values, but you are welcome to tweak them.
REMEMBER to add a comma and backslash (", \") after each line (except the final line).Code Block ui.tasknames = \ ... (YOUR EXISTING TASK NAMES) ... , \ estaipsize = Estimate Storage Space for AIP(s), \ readodometer = Read Odometer, \ transmitaip = Transmit AIP(s) to Storage, \ verifyaip = Verify AIP(s) exist in Storage, \ fetchaip = Fetch AIP(s) from Storage, \ auditaip = Audit/Compare against AIP(s), \ removeaip = Remove AIP(s) from Storage, \ restorefromaip = Restore Missing Object(s) from AIP(s), \ replacewithaip = Replace Existing Object(s) with AIP(s)
Optionally Create a Task Group: Finally, if you'd like to create a Task Group for these tasks, you can create a group named "replicate" and add them all to it. The below is just an example for how you may wish to set the
ui.taskgroups
andui.taskgroup.*
settings. It creates two Task Groups: (1) a "General Purpose Tasks" group for a few default DSpace Curation Tasks, and (2) a "Replication Suite Tasks" group for all these new Replication tasks.Code Block # Tasks may be organized into named groups which display together in UI drop-downs ui.taskgroups = \ general = General Purpose Tasks, \ replicate = Replication Suite Tasks # Group membership is defined using comma-separated lists of task names, one property per group ui.taskgroup.general = profileformats, requiredmetadata, checklinks ui.taskgroup.replicate = estaipsize, readodometer, transmitaip, verifyaip, fetchaip, auditaip, removeaip, restorefromaip, replacewithaip
Replication Suite Configuration: Next, in your
[dspace]/config/modules/replicate.cfg
you will want to ensure it is setup to properly use BagIt-based AIPs. Under the "AIP Packaging Settings" you'll want the following settings enabled:Code Block # Package type. Permitted values: 'mets', 'bagit' # mets = Generate default DSpace AIPs as described in: https://wiki.duraspace.org/display/DSDOC18/AIP+Backup+and+Restore # bagit = Generate AIPs based on the BagIt packaging format: https://wiki.ucop.edu/display/Curation/BagIt packer.pkgtype = bagit
...