Page History

Property:

dspace.dir

Example Value:

/dspace

Informational Note:

Root directory of DSpace installation. Omit the trailing '/'. Note that if you change this, there are several other parameters you will probably want to change to match, e.g. assetstore.dir .

Property:

dspace.hostname

Example Value:

dspace.hostname = dspace.mysu.edu

Informational Note:

Fully qualified hostname; do not include port number.

Property:

dspace.baseUrl

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="86c9241296989d15-97449c46-40e9469f-8217a8be-5f7ac06df6e6e6bd2702dd5b"><ac:plain-text-body><![CDATA[

Example Value:

[http://dspacetest.myu.edu:8080]

]]></ac:plain-text-body></ac:structured-macro>

Informational Note:

Main URL at which DSpace Web UI webapp is deployed. Include any port number, but do not include the trailing '/'.

Property:

dspace.url

Example Value:

dspace.url = ${dspace.baseUrl}/jspui

Informational note

DSpace base URL. URL that determines whether JSPUI or XMLUI will be loaded by default. Include port number etc., but NOT trailing slash. Change to /xmlui if you wish to use the xmlui (Manakin) as the default, or remove "/jspui" and set webapp of your choice as the "ROOT" webapp in the servlet engine.

Property:

dspace.oai.url

Example Value:

dspace.oai.url = ${dspace.baseUrl}/oai

Informational note:

The base URL of the OAI webapp (do not include /request).

Property:

dspace.name

Example Value:

dspace.name = DSpace at My University

Informational Note:

Short and sweet site name, used throughout Web UI, e-mails and elsewhere (such as OAI protocol)

Property:

assetstore.dir

Example Value:

assetstore.dir = ${dspace.dir}/assetstore

Informational Note:

This is Asset (bitstream) store number 0 (Zero). You need not place your assetstore under the /dspace directory, but may want to place it on a different logical volume on the server that DSpace resides. So, you might have something like this: _ assetstore.dir = /storevgm/assestore_.

Property:

Example Value:

Informational Note:

This property specifies extra asset stores like the one above, counting from one (1) upwards. This property is commented out (#) until it is needed.

Property:

assetstore.incoming

Example Value:

assetstore.incoming = 1

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="5a7625b1437a823d-2928bc6d-45204f51-bb0cb511-ff69904f5c42c7b782490d6a"><ac:plain-text-body><![CDATA[

Informational Note:

Informational Note: Specify the number of the store to use for new bitstreams with this property. The default is 0 [zero] which corresponds to the 'assestore.dir' above. As the asset store number is stored in the item metadata (in the database), always keep the assetstore numbering consistent and don't change the asset store number in the item metadata.

]]></ac:plain-text-body></ac:structured-macro>

Property:

log.init.config

Example Value:

log.init.config = ${dspace.dir}/config/log4j.properties

Informational Note:

This is where your logging configuration file is located. You may override the default log4j configuration by providing your own. Existing alternatives are:

log.init.config = ${dspace.dir}/config/log4j.properties
log.init.config = ${dspace.dir}/config/log4j-console.properties

Property:

log.dir

Example value:

log.dir = ${dspace.dir}/log

Informational Note:

This is where to put the logs. (This is used for initial configuration only)

Property:

useProxies

Example Value:

useProxies = true

Informational Note:

If your DSpace instance is protected by a proxy server, in order for log4j  to log the correct IP address of the user rather than of the proxy, it must be configured to look for the X-Forwarded-For header.  This feature can be enabled by ensuring this setting is set to true.  This also affects IPAuthentication, and should be enabled for that to work properly if your installation uses a proxy server.

Property:

search.dir

Example Value:

search.dir = ${dspace.dir}/search

Informational Note:

Where to put the search index files

Property:

search.max-clauses

Example Value:

search.max-clauses = 2048

Informational Note:

By setting higher values of search.max-clauses will enable prefix searches to work on larger repositories.

Property:

search.index.delay

Example Value:

search.index.delay = 5000

Informational Note:

It is possible to create a 'delayed index flusher'. If a web application pushes multiple search requests (i.e. a barrage or sword deposits, or multiple quick edits in the user interface), then this will combine them into a single index update. You set the property key to the number of milliseconds to wait for an update. The example value will hold a Lucene update in a queue for up to 5 seconds. After 5 seconds all waiting updates will be written to the Lucene index.

Property:

search.analyzer

Example Value:

search.analyzer = org.dspace.search.DSAnalyzer

Informational Note:

Which Lucene Analyzer implementation to use. If this is omitted or commented out, the standard DSpace analyzer (designed for English) is used by default.

Property:

search.analyzer

Example Value:

Informational Note:

Instead of the standard English analyzer, the Chinese analyzer is used.

Property:

search.operator_ }}

Example Value:

search.operator = OR

Informational Note

Boolean search operator to use. The currently supported values are OR and AND. If this configuration item is missing or commented out, OR is used. AND requires all the search terms to be present. OR requires one or more search terms to be present.

Property:

search.maxfieldlength

Example Value:

search.maxfieldlength = 10000

Informational Note:

This is the maximum number of terms indexed for a single field in Lucene. The default is 10,000 words—often not enough for full-text indexing. If you change this, you will need to re-index for the change to take effect on previously added items. -1 = unlimited (Integer.MAG_VALUE)

Property:

search.index.{}n

Example Value:

search.index.1 = author:dc.contributor.*

Informational Note

This property determines which of the metadata fields are being indexed for search. As an example, if you do not include the title field here, searching for a word in the title will not be matched with the titles of your items..

<id>

is an incremental number to distinguish each search index entry

<search label>

is the identifier for the search field this index will correspond to

<schema>

is the schema used. Dublin Core (DC) is the default. Others are possible.

<metadata field>

is the DSpace metadata field to be indexed.

Property:

handle.prefix

Example Value

handle.prefix = 1234.56789

Informational Note:

The default installed by DSpace is 123456789 but you will replace this upon receiving a handle from CNRI.

Property:

handle.dir

Example Value:

handle.dir = ${dspace.dir}/handle-server

Informational Note:

The default files, as shown in the Example Value is where DSpace will install the files used for the Handle Server.

Community Administration: Subcommunities and Collections

Property:

core.authorization.community-admin.create-subelement

Example Value:

core.authorization.community-admin.create-subelement = true

Informational Note:

Authorization for a delegated community administrator to create subcommunities or collections.

Property:

core.authorization.community-admin.delete-subelement

Example Value:

core.authorization.community-admin.delete-subelement = true

Informational Note:

Authorization for a delegated community administrator to delete subcommunities or collections.

Community Administration: Policies and The group of administrators

Property:

core.authorization.community-admin.policies

Example Value:

core.authorization.community-admin.policies = true

Informational Note:

Authorization for a delegated community administrator to administrate the community policies.

Property:

core.authorization.community-admin.admin-group

Example Value:

core.authorization.community-admin.admin-group = true

Informational Note:

Authorization for a delegated community administrator to edit the group of community admins.

Community Administration: Collections in the above Community

Property:

core.authorization.community-admin.collection.policies

Example Value:

core.authorization.community-admin.collection.policies = true

Informational Note:

Authorization for a delegated community administrator to administrate the policies for underlying collections.

Property:

core.authorization.community-admin.collection.template-item

Example Value:

core.authorization.community-admin.collection.template-item = true

Informational Note:

Authorization for a delegated community administrator to administrate the item template for underlying collections.

Property:

core.authorization.community-admin.collection.submitters

Example Value:

core.authorization.community-admin.collection.submitters = true

Informational Note:

Authorization for a delegated community administrator to administrate the group of submitters for underlying collections.

Property:

core.authorization.community-admin.collection.workflows

Example Value:

core.authorization.community-admin.collection.workflows = true

Informational Note:

Authorization for a delegated community administrator to administrate the workflows for underlying collections.

Property:

core.authorization.community-admin.collection.admin-group

Example Value:

core.authorization.community-admin.collection.admin-group = true

Informational Note:

Authorization for a delegated community administrator to administrate the group of administrators for underlying collections.

Community Administration: Items Owned by Collections in the Above Community

Property:

core.authorization.community-admin.item.delete

Example Value:

core.authorization.community-admin.item.delete = true

Informational Note:

Authorization for a delegated community administrator to delete items in underlying collections.

Property:

core.authorization.community-admin.item.withdraw

Example Value:

core.authorization.community-admin.item.withdraw = true

Informational Note:

Authorization for a delegated community administrator to withdraw items in underlying collections.

Property:

core.authorization.community-admin.item.reinstate

Example Value:

core.authorization.community-admin.item.reinstate = true

Informational Note:

Authorization for a delegated community administrator to reinstate items in underlying collections.

Property:

core.authorization.community-admin.item.policies

Example Value:

core.authorization.community-admin.item.policies = true

Informational Note:

Authorization for a delegated community administrator to administrate item policies in underlying collections.

Community Administration: Bundles of Bitstreams, related to items owned by collections in the above Community

Property:

core.authorization.community-admin.item.create-bitstream

Example Value:

core.authorization.community-admin.item.create-bitstream = true

Informational Note:

Authorization for a delegated community administrator to create additional bitstreams in items in underlying collections.

Property:

core.authorization.community-admin.item.delete-bitstream

Example Value:

core.authorization.community-admin.item.delete-bitstream = true

Informational Note:

Authorization for a delegated community administrator to delete bitstreams from items in underlying collections.

Property:

core.authorization.community-admin.item.cc-license

Example Value:

core.authorization.community-admin.item.cc-license = true

Informational Note:

Authorization for a delegated community administrator to administer licenses from items in underlying collections.

Community Administration:
The properties for collection administrators work similar to those
of community administrators,
with respect to collection administration.

Collection Administration:
Item owned by the above CollectionThe properties for collection
administrators work similar to those of
community administrators,
with respect to administration of
items in underlying collections.

Collection Administration:
Bundles of bitstreams, related to items owned by collections in the
above Community. The properties for collection administrators
work similar to those of community administrators, with respect to
administration of bitstreams related to items in underlying collections.

Item Administration.
The properties for item administrators work similar to those
of community and collection administrators, with respect to administration of
items in underlying collections.

core.authorization.item-admin.policies

Item Administration:
Bundles of bitstreams, related to items owned by collections in the
above Community. The properties for item administrators work
similar to those of community and collection administrators,
with respect to administration of bitstreams
related to items in underlying collections.

Property:

plugin.sequence.org.dspace.authenticate.AuthenticationMethod

Example Value:

Standard LDAP Configuration

Property:

ldap.enable

Example Value:

ldap.enable = false

Informational Note:

This setting will enable or disable LDAP authentication in DSpace. With the setting off, users will be required to register and login with their email address. With this setting on, users will be able to login and register with their LDAP user ids and passwords.

Property:

ldap.provider_url

Example Value:

ldap.provider_url = ldap://ldap.myu.edu/o=myu.edu

Informational Note:

This is the url to your institution's LDAP server. You may or may not need the /o=myu.edu part at the end. Your server may also require the ldaps:// protocol.

Property:

ldap.id_field

Example Value:

ldap.id_field = uid

Explanation:

This is the unique identifier field in the LDAP directory where the username is stored.

Property:

ldap.object_context

Example Value:

ldap.object_context = ou=people, o=myu.edu

Informational Note:

This is the object context used when authenticating the user. It is appended to the ldap.id_field and username. For example uid=username,ou=people,o=myu.edu. You will need to modify this to match your LDAP configuration.

Property:

ldap.search_context

Example Value:

ldap.search_context = ou=people

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="9066e6de6e79c775-fb38b2a2-482d45a5-9949b1ab-3896308b2186735360ab36da"><ac:plain-text-body><![CDATA[

Informational Note:

This is the search context used when looking up a user's LDAP object to retrieve their data for autoregistering. With ldap.autoregister turned on, when a user authenticates without an EPerson object we search the LDAP directory to get their name and email address so that we can create one for them. So after we have authenticated against uid=username,ou=people,o=byu.edu we now search in ou=people for filtering on [uid=username]. Often the ldap.search_context is the same as the ldap.object_context parameter. But again this depends on your LDAP server configuration.

]]></ac:plain-text-body></ac:structured-macro>

Property:

ldap.email_field

Example Value:

ldap.email_field = mail

Informational Note:

This is the LDAP object field where the user's email address is stored. "mail" is the default and the most common for ldap servers. If the mail field is not found the username will be used as the email address when creating the eperson object.

Property:

ldap.surname_field

Example Value:

ldap.surname_field = sn

Informational Note:

This is the LDAP object field where the user's last name is stored. "sn" is the default and is the most common for LDAP servers. If the field is not found the field will be left blank in the new eperson object.

Property:

ldap.givenname_field

Example Value:

ldap.givenname_field = givenName

Informational Note:

This is the LDAP object field where the user's given names are stored. I'm not sure how common the givenName field is in different LDAP instances. If the field is not found the field will be left blank in the new eperson object.

Property:

ldap.phone_field

Example Value:

ldap.phone_field = telephoneNumber

Informational Note:

This is the field where the user's phone number is stored in the LDAP directory. If the field is not found the field will be left blank in the new eperson object.

Property:

webui.ldap.autoregister

Example Value:

webui.ldap.autoregister = true

Informational Note:

This will turn LDAP autoregistration on or off. With this on, a new EPerson object will be created for any user who successfully authenticates against the LDAP server when they first login. With this setting off, the user must first register to get an EPerson object by entering their ldap username and password and filling out the forms.

LDAP Users Group

Property:

ldap.login.specialgroup

Example Value:

ldap.login.specialgroup = group-name

Informational Note:

If required, a group name can be given here, and all users who log into LDAP will automatically become members of this group. This is useful if you want a group made up of all internal authenticated users. (Remember to log on as the administrator, add this to the "Groups" with read rights).

Property:

ldap.search_scope

Example Value:

ldap.search_scope = 2

Informational Note:

This is the search scope value for the LDAP search during autoregistering. This will depend on your LDAP server setup. This value must be one of the following integers corresponding to the following values:

object scope : 0
one level scope : 1
subtree scope : 2

Property:

Example Value:

Informational Note:

The full DN and password of a user allowed to connect to the LDAP server and search for the DN of the user trying to log in. If these are not specified, the initial bind will be performed anonymously.

Property:

_ldap.netid_email_domain = _ }}

Example Value:

ldap.netid_email_domain = @example.com

Informational Note:

If your LDAP server does not hold an email address for a user, you can use the following field to specify your email domain. This value is appended to the netid in order to make an email address. E.g. a netid of 'user' and ldap.netid_email_domain as @example.com would set the email of the user to be _user@example.com}}

Property:

harvest.includerestricted.rss

Example Value:

harvest.includerestricted.rss = true

Informational Note:

When set to 'true' (default), items that haven't got the READ permission for the ANONYMOUS user, will be included in RSS feeds anyway.

Property:

harvest.includerestricted.oai

Example Value:

harvest.includerestricted.oai = true

Informational Note:

When set to true (default), items that haven't got the READ permission for the ANONYMOUS user, will be included in OAI sets anyway.

Property:

harvest.includerestricted.subscription

Example Value:

harvest.includerestricted.subscription = true

Informational Note:

When set to true (default), items that haven't got the READ permission for the ANONYMOUS user, will be included in Subscription emails anyway.

Property:

http.proxy.host

Example Value

http.proxy.host = proxy.myu.edu

Informational Note

Enter the host name without the port number.

Property:

http.proxy.port

Example Value

http.proxy.port = 2048

Informational Note

Enter the port number for the proxy server.

Property:

filter.plugins

Example Value:

(See example below)

Informational Note:

Place the names of the enabled MediaFilter or FormatFilter plugins. To enable Branded Preview, comment out the previous one line and then uncomment the two lines in found in dspace.cfg:

Word Text Extractor, JPEG Thumbnail,\
     Branded Preview JPEG

Property:

plugin.named.org.dspace.app.mediafilter.FormatFilter

Example Value:

(See example below)

Informational Note:

Assign "human-understandable" names to each filter

Property:

(See key below)

Example Value:

(See example below)

Informational Note:

Configure each filter's input format(s)

Property:

pdffilter.largepdfs

Example Value:

pdffilter.largepdfs = true

Informational Note:

It this value is set for "true", all PDF extractions are written to temp files as they are indexed. This is slower, but helps to ensure that PDFBox software DSpace uses does not eat up all your memory.

Property:

pdffilter.skiponmemoryexception

Example Value:

pdffilter.skiponmemoryexception = true

Informational Note:

If this value is set for "true", PDFs which still result in an "Out of Memory" error from PDFBox are skipped over. These problematic PDFs will never be indexed until memory usage can be decreased in the PDFBox software.

Properties:

Example Values:

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="683951e170f1f9c5-2dda7ae6-4b1446d1-9ee79e00-96df11a64ee9de6959d3d42c"><ac:plain-text-body><![CDATA[

Informational Note:

This defines a crosswalk named MODS whose configuration comes from the file [dspace]/config/crosswalks/mods.properties. (In the above example, the lower-case name was added for OAI-PMH)

]]></ac:plain-text-body></ac:structured-macro>

Properties:

crosswalk.submission.MODS.stylesheet

Example Value:

crosswalk.submission.MODS.stylesheet = crosswalks/mods-submission.xsl

Informational Note:

Configuration XSLT-driven submission crosswalk for MODS

Properties:

crosswalk.qdc.namspace.qdc.dc

Example Value:

_crosswalk.qdc.namspace.qdc.dc = http://purl.org/dc/elements/1.1_

Properties:

crosswalk.qdc.namspace.qdc.dcterms

Example Value:

_crosswalk.qdc.namspace.qdc.dc = http://purl.org/dc/terms/_

Properties:

crosswalk.qdc.schemaLocation.QDC

Example Value:

Properties:

crosswalk.qdc.properties.QDC

Example Value:

crosswalk.qdc.properties.QDC = crosswalks/QDC.properties

Informational Note:

Configuration of the QDC Crosswalk dissemination plugin for Qualified DC. _(Add lower-case name for OAI-PMH. That is, change QDC to qdc.)}}

Property:

event.dispatcher.default.class

Example Value:

event.dispatcher.default.class = org.dspace.event.BasicDispatcher

Informational Note:

This is the default synchronous dispatcher (Same behavior as traditional DSpace).

Property:

event.dispatcher.default.consumers

Example Value:

event.dispatcher.default.consumers = search, browse, eperson

Informational Note:

This is the default synchronous dispatcher (Same behavior as traditional DSpace).

Property:

event.dispatcher.noindex.class

Example Value:

event.dispatcher.noindex.class = org.dspace.event.BasicDispatcher

Informational Note:

The noindex dispatcher will not create search or browse indexes (useful for batch item imports).

Property:

event.dispatcher.noindex.consumers

Example Value:

event.dispatcher.noindex.consumers = eperson

Informational Note:

The noindex dispatcher will not create search or browse indexes (useful for batch item imports).

Property:

event.consumer.search.class

Example Value:

event.consumer.search.class = org.dspace.search.SearchConsumer

Informational Note:

Consumer to maintain the search index.

Property:

event.consumer.search.filters

Example Value:

(See example below)

Informational Note:

Consumer to maintain the search index.

Property:

event.consumer.browse.class

Example Value:

event.consumer.browse.class = org.dspace.browse.BrowseConsumer

Informational Note:

Consumer to maintain the browse index.

Property:

event.consumer.browse.filters

Example Value:

(See example below)

Informational Note:

Consumer to maintain the browse index.

Property:

event.consumer.eperson.class

Example Value:

event.consumer.eperson.class = org.dspace.eperson.EPersonConsumer

Informational Note:

Consumer related to EPerson changes

Property:

event.consumer.eperson.filters

Example Value:

event.consumer.eperson.filters = EPerson+Create

Informational Note:

Consumer related to EPerson changes

Property:

event.consumer.test.class

Example Value:

event.consumer.test.class = org.dspace.event.TestConsumer

Informational Note:

Test consumer for debugging and monitoring. Commented out by default.

Property:

event.consumer.test.filters

Example Value:

event.consumer.test.filters = All+All

Informational Note:

Test consumer for debugging and monitoring. Commented out by default.

Property:

testConsumer.verbose

Example Value:

testConsumer.verbose = true

Informational Note:

Set this to true to enable testConsumer messages to standard output. Commented out by default.

Property:

embargo.field.terms

Example Value:

embargo.field.terms = SCHEMA.ELEMENT.QUALIFIER

Informational Note:

Embargo terms will be stored in the item metadata. This property determines in which metadata field these terms will be stored. An example could be dc.embargo.terms

Property:

embargo.field.lift

Example Value:

embargo.field.lift = SCHEMA.ELEMENT.QUALIFIER

Informational Note:

The Embargo lift date will be stored in the item metadata. This property determines in which metadata field the computed embargo lift date will be stored. You may need to create a DC metadata field in your Metadata Format Registry if it does not already exist. An example could be dc.embargo.liftdate

Property:

embargo.terms.open

Example Value:

embargo.terms.open = forever

Informational Note:

You can determine your own values for the embargo.field.terms property (see above). This property determines what the string value will be for indefinite embargos. The string in terms field to indicate indefinite embargo.

Property:

plugin.single.org.dspace.embargo.EmbargoSetter

Example Value:

plugin.single.org.dspace.embargo.EmbargoSetter = org.dspace.embargo.DefaultEmbargoSetter

Informational Note:

To implement the business logic to set your embargos, you need to override the EmbargoSetter class. If you use the value DefaultEmbargoSetter, the default implementation will be used.

Property:

plugin.single.org.dspace.embargo.EmbargoLifter

Example Value:

plugin.single.org.dspace.embargo.EmbargoLifter = org.dspace.embargo.DefaultEmbargoLifter

Informational Note:

To implement the business logic to lift your embargos, you need to override the EmbargoLifter class. If you use the value DefaultEmbargoLifter, the default implementation will be used.

Property:

plugin.single.org.dspace.checker.BitstreamDispatcher

Example Value:

plugin.single.org.dspace.checker.BitstreamDispatcher = org.dspace.checker.SimpleDispatcher

Informational Note:

The Default dispatcher is case non is specified.

Property:

checker.retention.default

Example Value:

checker.retention.default = 10y

Informational Note:

This option specifies the default time frame after which all checksum checks are removed from the database (defaults to 10 years). This means that after 10 years, all successful or unsuccessful matches are removed from the database.

Property:

checker.retention.CHECKSUM_MATCH

Example Value:

checker.retention.CHECKSUM_MATCH = 8w

Informational Note:

This option specifies the time frame after which a successful “match” will be removed from your DSpace database (defaults to 8 weeks). This means that after 8 weeks, all successful matches are automatically deleted from your database (in order to keep that database table from growing too large).

Property:

org.dspace.app.itemexport.work.dir

Example Value:

org.dspace.app.itemexport.work.dir = ${dspace.dir}/exports

Informational Note:

The directory where the exports will be done and compressed.

Property:

org.dspace.app.itemexport.download.dir

Example Value:

org.dspace.app.itemexport.download.dir = ${dspace.dir}/exports/download

Informational Note

The directory where the compressed files will reside and be read by the downloader.

Property:

org.dspace.app.itemexport.life.span.hours

Example Value:

org.dspace.app.itemexport.life.span.hours = 48

Informational Note

The length of time in hours each archive should live for. When new archives are created this entry is used to delete old ones.

Property:

org.dspace.app.itemexport.max.size

Example Value:

org.dspace.app.itemexport.max.size = 200

Informational Note

The maximum size in Megabytes (Mb) that the export should be. This is enforced before the compression. Each bitstream's size in each item being exported is added up, if their cumulative sizes are more than this entry the export is not kicked off.

Property:

eperson.subscription.onlynew

Example Value:

eperson.subscription.onlynew = true

Informational Note:

For backwards compatibility, the subscription emails by default include any modified items. The property key is COMMENTED OUT by default.

Property:

bulkedit.valueseparator

Example Value:

__bulkedit.valueseparator =

Informational note

The delimiter used to separate values within a single field. For example, this will place the double pipe between multiple authors appearing in one record (Smith, William

Property:

bulkedit.fieldseparator

Example Value:

bulkedit.fieldseparator = ,

Informational note

The delimiter used to separate fields (defaults to a comma for CSV). Again, the user could change it something like '$'. If you wish to use a tab, semicolon, or hash (#) sign as the delimiter, set the value to be tab, semicolon or hash.

bulkedit.fieldseparator = tab

Property:

bulkedit.gui-item-limit

Example Value:

bulkedit.gui-item-limit = 20

Informational note

When using the WEBUI, this sets the limit of the number of items allowed to be edited in one processing. There is no limit when using the CLI.

Property:

bulkedit.ignore-on-export

Example Value:

Informational note

Metadata elements to exclude when exporting via the user interfaces, or when using the command line version and not using the -a (all) option.

Property:

metadata.hide.dc.description.provenance

Example Value:

metadata.hide.dc.description.provenance = true

Informational Note:

Hides the metadata in the property key above except to the administrator. Fields named here are hidden in the following places UNLESS the logged-in user is an Administrator:

1. XMLUI metadata XML view, and Item splash pages (long and short views).
2. JSPUI Item splash pages
3. OAI-PMH server, "oai_dc" format. (Note: Other formats are *not* affected.)To designate a field as hidden, add a property here in the form:_metadata.hide.SCHEMA.ELEMENT.QUALIFIER = true_This default configuration hides the dc.description.provenance field, since that usually contains email addresses which ought to be kept private and is mainly of interest to administrators.

Property:

webui.submit.blocktheses

Example Value:

webui.submit.blocktheses = false

Informational Note:

Controls whether or not that the submission should be marked as a thesis.

Property:

webui.submit.upload.required

Example Value:

webui.submit.upload.required = true

Informational Note:

Whether or not a file is required to be uploaded during the "Upload" step in the submission process. The default is true. If set to "false", then the submitter (human being) has the option to skip the uploading of a file.

Property:

webui.submit.enable-cc

Example Value:

webui.submit.enable-cc = false

Informational Note:

Set key to "false" if you are not using CC License. Set key to "true" if you are using CC License.

Property:

webui.submit.cc-jurisdiction

Example Value:

webui.submit.cc-jurisdiction = nz

Informational Note:

Should a jurisdiction be used? If so, which one? See http://creativecommons.org/international/ for a list of possible codes (e.g. nz = New Zealand, uk = England and Wales, jp = Japan)

Property:

webui.browse.thubnail.show

Example Value:

webui.browse.thubnail.show = true

Informational Note:

Controls whether to display thumbnails on browse and search result pages. If you have customized the Browse columnlist, then you must also include a "thumbnail" column in your configuration. _(This configuration property key is not used by XMLUI. To show thumbnails using XMLUI, you need to create a theme which displays them).}}

Property:

webui.browse.thumbnail.maxheight

Example Value:

webui.browse.thumbnail.maxheight = 80

Informational Note:

This property determines the maximum height of the browse/search thumbnails in pixels (px). This only needs to be set if the thumbnails are required to be smaller than the dimensions of thumbnails generated by MediaFilter.

Property:

webui.browse.thumbnail.maxwidth

Example Value:

webui.browse.thumbnail.maxwidth = 80

Informational Note:

This determines the maximum width of the browse/search thumbnails in pixels (px). This only needs to be set if the thumbnails are required to be smaller than the dimensions of thumbnails generated by MediaFilter.

Property:

webui.item.thumbnail.show

Example Value:

webui.item.thumbnail.show = true

Informational Note:

This determines whether or not to display the thumbnail against each bitstream. _(This configuration property key is not used by XMLUI. To show thumbnails using XMLUI, you need to create a theme which displays them).}}

Property:

webui.browse.thumbnail.linkbehavior

Example Value:

webui.browse.thumbnail.linkbehavior = item

Informational Note:

This determines where clicks on the thumbnail in browse and search screens should lead. The only values currently supported are "item" or "bitstream", which will either take the user to the item page, or directly download the bitstream.

Property:

thumbnail.maxwidth

Example Value:

__thumbnail.maxwidth = 80

Informational Note:

This property sets the maximum width of generated thumbnails that are being displayed on item pages.

Property:

thumbnail.maxheight

Example Value:

thumbnail.maxheight = 80

Informational Note:

This property sets the maximum height of generated thumbnails that are being displayed on item pages.

Property:

webui.preview.enabled

Example Value:

webui.preview.enabled = false

Informational Note:

Whether or not the user can "preview" the image.

Property:

webui.preview.maxwidth

Example Value:

webui.preview.maxwidth = 600

Informational Note:

This property sets the maximum width for the preview image.

Property:

webui.preview.maxheight

Example Value:

webui.preview.maxheight = 600

Informational Note:

This property sets the maximum height for the preview image.

Property:

webui.preview.brand

Example Value:

webui.preview.brand = My Institution Name

Informational Note:

This is the brand text that will appear with the image.

Property:

webui.preview.brand.abbrev

Example Value:

webui.preview.brand.abbrev = MyOrg

Informational Note:

An abbreviated form of the full Branded Name. This will be used when the preview image cannot fit the normal text.

Property:

webui.preview.brand.height

Example Value:

webui.preview.brand.height = 20

Informational Note:

The height (in px) of the brand.

Property:

webui.preview.brand.font

Example Value:

webui.preview.brand.font = SanSerif

Informational Note:

This property sets the font for your Brand text that appears with the image.

Property:

webui.preview.brand.fontpoint

Example Value:

webui.preview.brand.fontpoint = 12

Informational Note:

This property sets the font point (size) for your Brand text that appears with the image.

Property:

webui.preview.dc

Example Value:

webui.preview.dc = rights

Informational Note:

The Dublin Core field that will display along with the preview. This field is optional.

Property:

webui.strengths.show

Example Value:

webui.strengths.show = false

Informational Note:

Determines if communities and collections should display item counts when listed. The default behavior if omitted, is true. _(This configuration property key is not used by XMLUI. To show thumbnails using XMLUI, you need to create a theme which displays them).}}

Property:

webui.strengths.cache

Example Value:

webui.strengths.cache = false

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="e557ec1e51549156-6f195ec7-469e49cb-900d9654-7340d5c86c59ae2f7a6ab1fe"><ac:plain-text-body><![CDATA[

Informational Note:

When showing the strengths, should they be counted in real time, or fetched from the cache. Counts fetched in real time will perform an actual count of the database contents every time a page with this feature is requested, which will not scale. If you set the property key is set to cache ("true") you must run the following command periodically to update the count: /[dspace]/bin/dspace itemcounter. The default is to count in real time (set to "false").

]]></ac:plain-text-body></ac:structured-macro>

Property:

webui.browse.index.<{}n{}>

Example Value:

_webui.browse.index.1 = dateissued:metadata:dc.date.issued:date:full _ }}

Informational Note:

This is an example of how one "Defines the Indexes". See Defining the Indexes in the next sub-section.

Property:

webui.itemlist.sort-option.<{}n{}>

Example Value:

webui.itemlist.sort-option.1 = title:dc.title:title

Informational Note:

This is an example of how one "Defines the Sort Options". See Defining Sort Options in the following sub-section.

webui.browse.index.{}n

{{n_ is the index number. The index numbers must start from 1 and increment continuously by 1 thereafter. Deviation form this will cause an error during install or a configuration update. So anytime you add a new browse index, remember to increase the number. (Commented out index numbers may be used over again).

<index name>

The name by which the index will be identified. You will need to update your Messages.properties file to match this field. (The form used in the Messages.properties file is: browse.type.metadata.<index name> .

<metadata>

Only two options are available: "metadata" or "item"

<schema prefix>

The schema used for the field to be index. The default is dc (for Dublin Core).

<element>

The schema element. In Dublin Core, for example, the author element is referred to as "Contributor". The user should consult the default Dublin Core Metadata Registry table in Appendix A.

<qualifier>

This is the qualifier to the <element> component. The user has two choices: an asterisk "" or a proper qualifier of the element. The asterisk is a wildcard and causes DSpace to index all types of the schema element. For example, if you have the element "contributor" and the qualifier "" then you would index all contributor data regardless of the qualifier. Another example, you have the element "subject" and the qualifier "lcsh" would cause the indexing of only those fields that have the qualifier "lcsh". (This means you would only index Library of Congress Subject Headings and not all data elements that are subjects.

<datatype field>

This refers to the datatype of the field: _date _the index type will be treated as a date object _title _the index type will be treated like a title, which will include a link to the item page _text _the index type will be treated as plain text. If single mode is specified then this will link to the full mode list

<index display>

Choose full or single. This refers to the way that the index will be displayed in the browse listing. "Full" will be the full item list as specified by webui.itemlist.columns ; "single" will be a single list of only the indexed term.

webui.browse.index.{}n

{{n_ is an arbitrary number you choose.

<option name>

The name by which the sort option will be identified. This may be used in later configuration or to locate the message key (found in Messages.properties file) for this index.

<schema prefix>

The schema used for the field to be index. The default is dc (for Dublin Core).

<element>

The schema element. In Dublin Core, for example, the author element is referred to as "Contributor". The user should consult the default Dublin Core Metadata Registry table in Appendix A.

<qualifier>

This is the qualifier to the <element> component. The user has two choices: an asterisk "*" or a proper qualifier of the element.

<datatype field>

This refers to the datatype of the field: _date_the sort type will be treated as a date object_text_the sort type will be treated as plain text.

Property:

webui.browse.metadata.case-insensitive

Example Value:

webui.browse.metadata.case-insensitive = true

Informational Note:

This controls the normalization of the index entry. Uncommenting the option (which is commented out by default) will make the metadata items case-insensitive. This will result in a single entry in the example above. However, the value displayed may be any one of the above—depending on what representation was present in the first item indexed.

Property:

webui.browse.value_columns.max

Example Value:

webui.browse.value_columns.max = 500

Informational Note:

This sets the options for the size (number of characters) of the fields stored in the database. The default is 0, which is unlimited size for fields holding indexed data. Some database implementations (e.g. Oracle) will enforce their own limit on this field size. Reducing the field size will decrease the potential size of your database and increase the speed of the browse, but it will also increase the chance of mis-ordering of similar fields. The values are commented out, but proposed values for reasonably performance versus result quality. This affects the size of field for the browse value (this will affect display, and value sorting )

Property:

webui.browse.sort_columns.max

Example Value:

webui.browse.sort_columns.max = 200

Informational Note:

Size of field for hidden sort columns (this will affect only sorting, not display). Commented out as default.

Property:

webui.browse.value_columns.omission_mark

Example Value:

webui.browse.value_columns.omission_mark = ...

Informational Note:

Omission mark to be placed after truncated strings in display. The default is "...".

Property:

plugin.named.org.dspace.sort.OrderFormatDelegate

Example Value:

Informational Note:

This sets the option for how the indexes are sorted. All sort normalizations are carried out by the OrderFormatDelegate. The plugin manager can be used to specify your own delegates for each datatype. The default datatypes (and delegates) are:

author = org.dspace.sort.OrderFormatAuthor
title  = org.dspace.sort.OrderFormatTitle
text   = org.dspace.sort.OrderFormatText

If you redefine a default datatype here, the configuration will be used in preferences to the default. However, if you do not explicitly redefine a datatype, then the default will still be used in addition to the datatypes you do specify.As of DSpace release 1.5.2, the multi-lingual MARC21 title ordering is configured as default, as shown in the example above. To use the previous title ordering (before release 1.5.2), comment out the configuration in your dspace.cfg file.

Property:

webui.browse.index.__n_

Example Value:

webui.browse.index.5 = lcAuthor:metadataAuthority:dc.contributor.author:authority

Informational Note:

Yet to be written.

Property:

webui.browse.author-field

Example Value:

webui.browse.author-field = dc.contributor.*

Informational Note:

This defines which field is the author/editor, etc. listing.

Property:

webui.browse.author-limit

Example Value:

webui.browse.author-limit = <{}n{}>

Informational Note:

Where <n> is an integer number of values to be displayed. Use -1 for unlimited (the default value).

Property:

webui.browse.link.<{}n{}>

Example Value:

webui.browse.link.1 = author:dc.contributor.*

Informational Note:

This is used to configure which fields should link to other browse listings. This should be associated with the name of one of the browse indexes (webui.browse.index.n) with a metadata field listed in webui.itemlist.columns above. If this condition is not fulfilled, cross-linking will not work. Note also that crosslinking only works for metadata fields not tagged as title in webui.itemlist.columns.

webui.browse.link.{}n

{{n_ is an arbitrary number you choose

<index name>

This need to match your entry for the index name from webui.browse.index property key.

<display column metadata>

Use the DC element (and qualifier)

Property:

recent.submission.sort-option

Example Value:

recent.submission.sort-option = dateaccessioned

Informational Note:

First is to define the sort name (from webui.browse.sort-options) to use for displaying recent submissions.

Property:

recent.submissions.count

Example Value:

recent.submissions.count = 5

Informational Note:

Defines how many recent submissions should be displayed at any one time.

Property:

plugin.named.org.dspace.content.license.
     LicenseArgumentFormatter

(property key broken up for display purposes only)

Example Value:

(See example below)

Informational Note:

It is possible include contextual information in the submission license using substitution variables. The text substitution is driven by a plugin implementation.

Property:

webui.feed.enable

Example Value:

webui.feed.enable = true

Informational Note:

By default, RSS feeds are set to true . Change key to "false" to disable.

Property:

webui.feed.items

Example Value:

webui.feed.items = 4

Informational Note:

Defines the number of DSpace items per feed (the most recent submissions)

Property:

webui.feed.cache.size

Example Value:

webui.feed.cache.size = 100

Informational Note:

Defines the maximum number of feeds in memory cache. Value of "0" will disable caching.

Property:

webui.feed.cache.age

Example Value:

webui.feed.cache.age = 48

Informational Note:

Defines the number of hours to keep cached feeds before checking currency. The value of "0" will force a check with each request.

Property:

webui.feed.formats

Example Value:

webui.feed.formats = rss_1.0,rss_2.0,atom_1.0

Informational Note:

Defines which syndication formats to offer. You can use more than one; use a comma-separated list. The following list are the available values: rss_0.90, rss_0.91, rss_0.92, rss_0.93, rss_0.94, rss_1.0, rss_2.0, atom_1.0.

Property:

webui.feed.localresolve

Example Value:

webui.feed.localresolve = false

Informational Note:

By default, (set to false), URLs returned by the feed will point at the global handle resolver (e.g. http://hdl.handle.net/123456789/1). If set to true the local server URLs are used (e.g. http://myserver.myorg/handle/123456789/1).

Property:

webui.feed.item.title

Example Value:

webui.feed.item.title = dc.title

Informational Note:

This property customizes each single-value field displayed in the feed information for each item. Each of the fields takes a single metadata field. The form of the key is <scheme prefix>.<element>.<qualifier> In place of the qualifier, one may leave it blank to exclude any qualifiers or use the wildcard "*" to include all qualifiers for a particular element.

Property:

webui.feed.item.date

Example Value:

webui.feed.item.date = dc.date.issued

Informational Note:

This property customizes each single-value field displayed in the feed information for each item. Each of the fields takes a single metadata field. The form of the key is <scheme prefix>.<element>.<qualifier> In place of the qualifier, one may leave it blank to exclude any qualifiers or use the wildcard "*" to include all qualifiers for a particular element.

Property:

webui.feed.item.description

Example Value:

(See example below)

Informational Note:

One can customize the metadata fields to show in the feed for each item's description. Elements are displayed in the order they are specified in dspace.cfg.Like other property keys, the format of this property key is: webui.feed.item.description = <scheme prefix>.<element>.<qualifier>. In place of the qualifier, one may leave it blank to exclude any qualifiers or use the wildcard "*" to include all qualifiers for a particular element.

Property:

webui.feed.item.author

Example Value:

webui.feed.item.author = dc.contributor.author

Informational Note:

The name of field to use for authors (Atom only); repeatable.

Property:

webui.feed.logo.url

Example Value:

webui.feed.logo.url = ${dspace.url}/themes/mysite/images/mysite-logo.png

Informational Note:

Customize the image icon included with the site-wide feeds. This must be an absolute URL.

Property:

webui.feed.item.dc.creator

Example Value:

webui.feed.item.dc.creator = dc.contributor.author

Informational Note:

This optional property adds structured DC elements as XML elements to the feed description. They are not the same thing as, for example, webui.feed.item.description. Useful when a program or stylesheet will be transforming a feed and wants separate author, description, date, etc.

Property:

webui.feed.item.dc.date

Example Value:

webui.feed.item.dc.date = dc.date.issued

Informational Note:

This optional property adds structured DC elements as XML elements to the feed description. They are not the same thing as, for example, webui.feed.item.description. Useful when a program or stylesheet will be transforming a feed and wants separate author, description, date, etc.

Property:

webui.feed.item.dc.description

Example Value:

webui.feed.item.dc.description = dc.description.abstract

Informational Note:

This optional property adds structured DC elements as XML elements to the feed description. They are not the same thing as, for example, webui.feed.item.description. Useful when a program or stylesheet will be transforming a feed and wants separate author, description, date, etc.

Property:

websvc.opensearch.enable

Example Value:

websvc.opensearch.enable = false

Informational Note:

Whether or not OpenSearch is enabled. By default, the feature is disabled. Change the property key to 'true' to enable.

Property:

websvc.opensearch.uicontext

Example Value:

websvc.opensearch.uicontext = simple-search

Informational Note:

Context for HTML request URLs. Change only for non-standard servlet mapping.

Property:

websvc.opensearch.svccontext

Example Value:

websvc.opensearch.svccontext = open-search/

Informational Note:

Context for RSS/Atom request URLs. Change only for non-standard servlet mapping.

Property:

websvc.opensearch.autolink

Example Value:

websvc.opensearch.autolink = true

Informational Note:

Present autodiscovery link in every page head.

Property:

websvc.opensearch.validity

Example Value:

websvc.opensearch.validity = 48

Informational Note:

Number of hours to retain results before recalculating. This applies to the Manakin interface only.

Property:

websvc.opensearch.shortname

Example Value:

websvc.opensearch.shortname = DSpace

Informational Note:

A short name used in browsers for search service. It should be sixteen (16) or fewer characters.

Property:

websvc.opensearch.longname

Example Value:

websvc.opensearch.longname = ${dspace.name}

Informational Note:

A longer name up to 48 characters.

Property:

websvc.opensearch.description

Example Value:

websvc.opensearch.description = ${dspace.name} DSpace repository

Informational Note:

Brief service description

Property:

websvc.opensearch.faviconurl

Example Value:

_websvc.opensearch.faviconurl = http://www.dspace.org/images/favicon.ico_

Informational Note:

Location of favicon for service, if any. They must by 16 x 16 pixels. You can provide your own local favicon instead of the default.

Property:

websvc.opensearch.samplequery

Example Value:

websvc.opensearch.samplequery = photosynthesis

Informational Note:

Sample query. This should return results. You can replace the sample query with search terms that should actually yield results in your repository.

Property:

websvc.opensearch.tags

Example Value:

websc.opensearch.tags = IR DSpace

Informational Note:

Tags used to describe search service.

Property:

websvc.opensearch.formats

Example Value:

websvc.opensearch.formats = html,atom,rss

Informational Note:

Result formats offered. Use one or more comma-separated from the list: html, atom, rss. Please note that html is required for auto discovery in browsers to function, and must be the first in the list if present.

Property:

webui.content_disposition_threshold

Example value:

webui.content_disposition_threshold = 8388608

Informational Note:

The default value is set to 8Mb. This property key applies to the JSPUI interface.

Property:

xmlui.content_disposition_threshold

Example Value:

xmlui.content_disposition_threshold = 8388608

Informational Note:

The default value is set to 8Mb. This property key applies to the XMLUI (Manakin) interface.

Property:

webui.html.max-depth-guess

Example Value:

webui.html.max-depth-guess = 3

Informational Note:

When serving up composite HTML items in the JSP UI, how deep can the request be for us to serve up a file with the same name? For example, if one receives a request for "foo/bar/index.html" and one has a bitstream called just "index.html", DSpace will serve up the former bitstream (foo/bar/index.html) for the request if webui.html.max-depth-guess is 2 or greater. If webui.html.max-depth-guess is 1 or less, then DSpace would not serve that bitstream, as the depth of the file is greater. If webui.html.max-depth-guess is zero, the request filename and path must always exactly match the bitstream name. The default is set to 3.

Property:

xmlui.html.max-depth-guess

Example Value:

xmlui.html.max-depth-guess = 3

Informational Note:

When serving up composite HTML items in the XMLUI, how deep can the request be for us to serve up a file with the same name? For example, if one receives a request for "foo/bar/index.html" and one has a bitstream called just "index.html", DSpace will serve up the former bitstream (foo/bar/index.html) for the request if webui.html.max-depth-guess is 2 or greater. If xmlui.html.max-depth-guess is 1 or less, then DSpace would not serve that bitstream, as the depth of the file is greater. If _webui.html.max-depth-guess _is zero, the request filename and path must always exactly match the bitstream name. The default is set to 3.

Property:

sitemap.dir

Example Value:

sitemap.dir = ${dspace.dir}/sitemaps

Informational Note:

The directory where the generate sitemaps are stored.

Property:

sitemap.engineurls

Example Value:

_sitemap.engineurls = http://www.google.com/webmasters/sitemaps/ping?sitemap=_

Informational Note:

Comma-separated list of search engine URLs to 'ping' when a new Sitemap has been created. Include everything except the Sitemap UL itself (which will be URL-encoded and appended to form the actual URL 'pinged').Add the following to the above parameter if you have an application ID with Yahoo: http://search.yahooapis.com/SiteExplorererService/V1/updateNotification?appid=REPLACE_ME?url=_. (Replace the component _REPLACE_ME with your application ID). There is no known 'ping' URL for MSN/Live search.

Property:

plugin.named.org.dspace.content.authority.ChoiceAuthority

Example Value:

Informational Note:

_ {{

Property:

plugin.selfnamed.org.dspace.content.authority.ChoiceAuthority

Example Value:

plugin.selfnamed.org.dspace.content.authority.ChoiceAuthority = \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
org.dspace.content.authority.DCInputAuthority

Property:

lcname.url

Example Value:

_lcname.url = http://alcme.oclc.org/srw/search/lcnaf_

Informational Note:

Location (URL) of the Library of Congress Name Service

Property:

sherpa.romeo.url

Example Value:

_sherpa.romeo.url = http://www.sherpa.ac.uk/romeo/api24.php_

Informational Note:

Location (URL) of the SHERPA/RoMEO authority plugin

Property:

authority.minconfidence

Example Value:

authority.minconfidence = ambiguous

Informational Note:

This sets the default lowest confidence level at which a metadata value is included in an authority-controlled browse (and search) index. It is a symbolic keyword, one of the following values (listed in descending order): accepted, uncertain, ambiguous, notfound, failed, rejected, novalue, unset. See org.dspace.content.authority.Choices source for descriptions.

Property:

xmlui.lookup.select.size

Example Value:

xmlui.lookup.select.size = 12

Informational Note:

This property sets the number of selectable choices in the Choices lookup popup

Property:

upload.temp.dir

Example Value:

upload.temp.dir = ${dspace.dir}/upload

Informational Note:

This property sets where DSpace temporarily stores uploaded files.

Property:

upload.max

Example Value:

upload.max = 536870912

Informational Note:

Maximum size of uploaded files in bytes. A negative setting will result in no limit being set. The default is set for 512Mb.

Property:

webui.licence_bundle.show

Example Value:

webui.licence_bundle.show = false

Informational Note:

Sets whether to display the contents of the license bundle (often just the deposit license in the standard DSpace installation).

Property:

webui.itemdisplay.default

Example Value:

Informational Note:

This is used to customize the DC metadata fields that display in the item display (the brief display) when pulling up a record. The format is: <schema>.<element>.<optionalqualifier> In place of the qualifier, one can use the wildcard "" to include all fields of the same element, or, leave it blank for unqualified elements. Additionally, two additional options are available for behavior/rendering: (date) and (link). See the following examples: dc.title = Dublin Core element 'title' (unqualified)dc.title.alternative = DC element 'title', qualifier 'alternative'dc.title. = All fields with Dublin Core element 'title' (any or no qualifier)dc.identifier.uri(link) = DC identifier.uri, rendered as a link_dc.date.issued(date)_ = DC date.issued, rendered as a dateThe Messages.properties file controls how the fields defined above will display to the user. If the field is missing from the Messages.properties_file, it will not be display. Look in _Messages.properties under metadata.dc.<field>. Example:

metadata.dc.contributor.other       = Authors
metadata.dc.contributor.author      = Authors
metadata.dc.title.*                 = Title

Please note: The order in which you place the values to the property key control the order in which they will display to the user on the outside world. (See the Example Value above).

Property:

Example Value:

Informational Note:

When using "resolver" in webui.itemdisplay to render identifiers as resolvable links, the base URL is take from <code>webui.resolver.<n>.baseurl<code> where <code>webui.resolver.<n>.baseurl<code> matches the urn specified in the metadata value. The value is appended to the "baseurl" as is, so the baseurl needs to end with the forward slash almost in any case. If no urn is specified in the value it will be displayed as simple text.For the doi and hdl urn defaults values are provided, respectively http://dc.doi.org and http://hdl.handle.net are used.If a metadata value with style "doi", "handle" or "resolver" matches a URL already, it is simply rendered as a link with no other manipulation.

Property:

plugin.single.org.dspace.app.webui.util.StyleSelection

Example Value:

Informational Note:

Specify which strategy to use for select the style for an item.

Property:

webui.itemdisplay.thesis.collections

Example Value:

webui.itemdisplay.thesis.collections = 123456789/24, 123456789/35

Informational Note:

Specify which collections use which views by Handle.

Property:

Example Value:

Informational Note:

Specify which metadata to use as name of the style

Property:

webui.itemlist.columns

Example Value:

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="f3be538841b4ecf1-4392da74-4aa94cd2-bef5aa85-1707990a82aa248c0bbae2c2"><ac:plain-text-body><![CDATA[

Informational Note:

Customize the DC fields to use in the item listing page. Elements will be displayed left to right in the order they are specified here. The form is <schema prefix>.<element>[.<qualifier>

.][(date)], ... Although not a requirement, it would make sense to include among the listed fields at least the date and title fields as specified by the webui.browse.index. configuration options in the next section mentioned. (cf.)If you have enabled thumbnails (webui.browse.thumbnail.show), you must also include a 'thumbnail' entry in your columns—this is where the thumbnail will be displayed.

]]></ac:plain-text-body></ac:structured-macro>

Property:

webui.itemlist.width

Example Value:

webui.itemlist.width = *, 130, 60%, 40%

Informational Note:

You can customize the width of each column with the following line—you can have numbers (pixels) or percentages. For the 'thumbnail' column, a setting of '*' will use the max width specified for browse thumbnails (cf. webui.browse.thumbnail.maxwidth, thumbnail.maxwidth)

Property:

Example Value:

__ }}

Informational Note:

You can override the DC fields used on the listing page for a given browse index and/or sort option. As a sort option or index may be defined on a field that isn't normally included in the list, this allows you to display the fields that have been indexed/sorted on.There are a number of forms the configuration can take, and the order in which they are listed below is the priority in which they will be used (so a combination of an index name and sort name will take precedence over just the browse name).In the last case, a sort option name will always take precedence over a browse index name. Note also, that for any additional columns you list, you will need to ensure there is an itemlist.<field name> entry in the messages file.

Property:

webui.itemlist.dateaccessioned.columns

Example Value:

webui.itemlist.dateaccessioned.columns = thumbnail, dc.date.accessioned(date), dc.title, dc.contributor.*

Informational Note:

This would display the date of the accession in place f the issue date whenever the dateaccessioned browsed index or sort option is selected. Just like webui.itemlist.columns, you will need to include a 'thumbnail' entry to display the thumbnails in the item list.

Property:

webui.itemlist.dateaccessioned.widths

Example Value:

webui.itemlist.dateaccessioned.widths = *, 130, 60%, 40%

Informational Note:

As in the aforementioned property key, you can customize the width of the columns for each configured column list, substituting '.widths' for '.columns' in the property name. See the setting for _webui.itemlist.widths_for more information.

Property:

webui.itemlist.tablewidth

Example Value:

webui.itemlist.tablewidth = 100%

Informational Note:

You can also set the overall size of the item list table with the following setting. It can lead to faster table rendering when used with the column widths above, but not generally recommended.

Property:

webui.session.invalidate

Example Value:

webui.session.invalidate = true

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="85fa7de6534968ff-d2b7a4cb-433a4f28-9d959f9b-41494e3988a3777eb38c48a8"><ac:plain-text-body><![CDATA[

Informational Note:

Enable or disable session invalidation upon login or logout. This feature is enabled by default to help prevent session hijacking but may cause problems for shibboleth, etc. If omitted, the default value is 'true'. [Only used for JSPUI authentication].

]]></ac:plain-text-body></ac:structured-macro>

Property:

default.locale

Example Value:

default.locale = en

Informational Note:

The default language for the application is set with this property key. This is a locale according to i18n and might consist of country, country_language or country_language_variant. If no default locale is defined, then the server default locale will be used. The format of a local specifier is described here: http://java.sun.com/j2se/1.4.2/docs/api/java/util/Locale.html

Property:

webui.supported.locale

Example Value:

webui.supported.locale = en, de

or perhaps

webui.supported.locals = en, en_ca, de

Informational Note:

All the locales that are supported by this instance of DSpace. Comma separated list.

Property:

itemmap.author.index

Example Value:

itemmap.author.index = author

Informational Note:

If you change the name of your author browse field, you will also need to update this property key.

Property:

webui.suggest.enable

Example Value:

webui.suggest.enable = true

Informational Note:

Show a link to the item recommendation page from item display page.

Property:

webui.suggest.loggedinusers.only

Example Value:

webui.suggest.loggedinusers.only = true

Informational Note:

Enable only if the user is logged in. If this key commented out, the default value is false.

Property:

webui.controlledvocabulary.enable

Example Value:

webui.controlledvocabulary.enable = true

Informational Note:

Enable or disable the controlled vocabulary add-on. WARNING: This feature is not compatible with WAI (it requires javascript to function).

Property:

webui.session.invalidate

Example Value:

webui.session.invalidate = true

Informational Note:

Enable or disable session invalidation upon login or logout. This feature is enabled by default to help prevent session hijacking but may cause problems for shibboleth, etc. If omitted, the default value is 'true'.

Property:

xmlui.supported.locales

Example Value:

xmlui.supported.locales = en, de

Informational Note:

A list of supported locales for Manakin. Manakin will look at a user's browser configuration for the first language that appears in this list to make available to in the interface. This parameter is a comma separated list of Locales. All types of Locales country, country_language, country_language_variant. Note that if the appropriate files are not present (i.e. Messages_XX_XX.xml) then Manakin will fall back through to a more general language.

Property:

xmlui.force.ssl

Example Value:

xmlui.force.ssl = true

Informational Note:

Force all authenticated connections to use SSL, only non-authenticated connections are allowed over plain http. If set to true, then you need to ensure that the 'dspace.hostname' parameter is set to the correctly.

Property:

xmlui.user.registration

Example Value:

xmlui.user.registration = true

Informational Note:

Determine if new users should be allowed to register. This parameter is useful in conjunction with Shibboleth where you want to disallow registration because Shibboleth will automatically register the user. Default value is true.

Property:

xmlui.user.editmetadata

Example Value:

xmlui.user.editmetadata = true

Informational Note:

Determines if users should be able to edit their own metadata. This parameter is useful in conjunction with Shibboleth where you want to disable the user's ability to edit their metadata because it came from Shibboleth. Default value is true.

Property:

xmlui.user.assumelogon

Example Value:

xmlui.user.assumelogon = true

Informational Note:

Determine if super administrators (those whom are in the Administrators group) can login as another user from the "edit eperson" page. This is useful for debugging problems in a running dspace instance, especially in the workflow process. The default value is false, i.e., no one may assume the login of another user.

Property:

xmlui.user.loginredirect

Example Value:

xmlui.user.loginredirect = /profile

Informational Note:

After a user has logged into the system, which url should they be directed? Leave this parameter blank or undefined to direct users to the homepage, or /profile for the user's profile, or another reasonable choice is /submissions to see if the user has any tasks awaiting their attention. The default is the repository home page.

Property:

xmlui.theme.allowoverrides

Example Value:

xmlui.theme.allowoverrides = false

Informational Note:

Allow the user to override which theme is used to display a particular page. When submitting a request add the HTTP parameter "themepath" which corresponds to a particular theme, that specified theme will be used instead of the any other configured theme. Note that this is a potential security hole allowing execution of unintended code on the server, this option is only for development and debugging it should be turned off for any production repository. The default value unless otherwise specified is "false".

Property:

xmlui.bundle.upload

Example Value:

xmlui.bundle.upload = ORIGINAL, METADATA, THUMBNAIL, LICENSE, CC_LICENSE

Informational Note:

Determine which bundles administrators and collection administrators may upload into an existing item through the administrative interface. If the user does not have the appropriate privileges (add and write) on the bundle then that bundle will not be shown to the user as an option.

Property:

xmlui.community-list.render.full

Example Value:

xmlui.community-list.render.full = true

Informational Note:

On the community-list page should all the metadata about a community/collection be available to the theme. This parameter defaults to true, but if you are experiencing performance problems on the community-list page you should experiment with turning this option off.

Property:

xmlui.community-list.cache

Example Value:

xmlui.community-list.cache = 12 hours

Informational Note:

Normally, Manakin will fully verify any cache pages before using a cache copy. This means that when the community-list page is viewed the database is queried for each community/collection to see if their metadata has been modified. This can be expensive for repositories with a large community tree. To help solve this problem you can set the cache to be assumed valued for a specific set of time. The downside of this is that new or editing communities/collections may not show up the website for a period of time.

Property:

xmlui.bistream.mods

Example Value:

xmlui.bistream.mods = true

Informational Note:

Optionally, you may configure Manakin to take advantage of metadata stored as a bitstream. The MODS metadata file must be inside the "METADATA" bundle and named MODS.xml. If this option is set to 'true' and the bitstream is present then it is made available to the theme for display.

Property:

xmlui.bitstream.mets

Example Value:

xmlui.bitstream.mets = true

Informational Note:

Optionally, you may configure Manakin to take advantage of metadata stored as a bitstream. The METS metadata file must be inside the "METADATA" bundle and named METS.xml. If this option is set to "true" and the bitstream is present then it is made available to the theme for display.

Property:

xmlui.google.analytics.key

Example Value:

xmlui.google.analytics.key = UA-XXXXXX-X

Informational Note:

If you would like to use Google analytics to track general website statistics then use the following parameter to provide your analytics key. First sign up for an account at http://analytics.google.com, then create an entry for your repositories website. Google Analytics will give you a snippet of javascript code to place on your site, inside that snip it is your google analytics key usually found in the line: _uacct = "UA-XXXXXXX-X" Take this key (just the UA-XXXXXX-X part) and place it here in this parameter.

Property:

xmlui.controlpanel.activity.max

Example Value:

xmlui.controlpanel.activity.max = 250

Informational Note:

Assign how many page views will be recorded and displayed in the control panel's activity viewer. The activity tab allows an administrator to debug problems in a running DSpace by understanding who and how their dspace is currently being used. The default value is 250.

Property:

xmlui.controlpanel.activity.ipheader

Example Value:

xmlui.controlpanel.activity.ipheader = X-Forward-For

Informational Note:

Determine where the control panel's activity viewer receives an events IP address from. If your DSpace is in a load balanced environment or otherwise behind a context-switch then you will need to set the parameter to the HTTP parameter that records the original IP address.

Property:

oai.didl.maxresponse

Example Value:

oai.didle.maxresponse = 0

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="7a726e8aa7cf1841-2d0acc2f-4f88445f-9a0e825e-567af2421bd9d58473047e03"><ac:plain-text-body><![CDATA[

Informational Note:

Max response size for DIDL. This is the maximum size in bytes of the files you wish to enclose Base64 encoded in your responses, remember that the base64 encoding process uses a lot of memory. We recommend at most 200000 for answers of 30 records each on a 1 Gigabyte machine. Ultimately this will change to a streaming model and remove this restriction. Also please remember to allocate plenty of memory, at least 512 MB to your Tomcat.Optional: DSpace uses 100 records as the limit for the oai responses. You can alter this by changing /[dspace-source]/dspace-oai/dspace-oai-api/src/main/java/org/dspace/app/oai/DSpaceOAICatalog.java to codify the declaration: private final int MAX_RECORDS = 100 to private final int MAX_RECORDS = 30

]]></ac:plain-text-body></ac:structured-macro>

Property:

harvester.eperson

Example Value:

harvester.eperson = admin@myu.edu

Informational Note:

The EPerson under whose authorization automatic harvesting will be performed. This field does not have a default value and must be specified in order to use the harvest scheduling system. This will most likely be the DSpace admin account created during installation.

Property:

dspace.oai.url

Example Value:

_dspace.oai.url = http://myu.edu:8080/oai_

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="2dbfc925a240f90d-4ab2038e-46bc4efd-90bbb311-ad7bc8dbfdddc92fc55031c1"><ac:plain-text-body><![CDATA[

Informational Note:

The base url of the OAI-PMH disseminator webapp (i.e. do not include the /request on the end). This is necessary in order to mint URIs for ORE Resource Maps. The default value of [http://$]{dspace.hostname}:8080/oai will work for a typical installation, but should be changed if appropriate.

]]></ac:plain-text-body></ac:structured-macro>

Property:

ore.authoritative.source

Example Value:

_ore.authoritative.source = oai

xmlui_ }}

Informational Note:

The webapp responsible for minting the URIs for ORE Resource Maps. If using oai, the dspace.oai.uri config value must be set. The URIs generated for ORE ReMs follow the following convention for both cases._baseURI/metadata/handle/theHandle/ore.xml}}

Property:

harvester.autoStart

Example Value:

harvester.autoStart = false

Informational Note:

Determines whether the harvest scheduler process starts up automatically when the XMLUI webapp is redeployed.

Property:

harvester.oai.metadataformats.PluginName

Example Value:

Informational Note:

This field can be repeated and serves as a link between the metadata formats supported by the local repository and those supported by the remote OAI-PMH provider. It follows the form harvester.oai.metadataformats.PluginName = NamespaceURI,Optional Display Name . The pluginName designates the metadata schemas that the harvester "knows" the local DSpace repository can support. Consequently, the PluginName must correspond to a previously declared ingestion crosswalk. The namespace value is used during negotiation with the remote OAI-PMH provider, matching it against a list returned by the ListMetadataFormats request, and resolving it to whatever metadataPrefix the remote provider has assigned to that namespace. Finally, the optional display name is the string that will be displayed to the user when setting up a collection for harvesting. If omitted, the PluginName:NamespaceURI combo will be displayed instead.

Property:

harvester.oai.oreSerializationFormat.OREPrefix

Example Value:

Informational Note:

This field works in much the same way as harvester.oai.metadataformats.PluginName . The OREPrefix must correspond to a declared ingestion crosswalk, while the Namespace must be supported by the target OAI-PMH provider when harvesting content.

Property:

harvester.timePadding

Example Value:

harvester.timePadding = 120

Informational Note:

Amount of time subtracted from the from argument of the PMH request to account for the time taken to negotiate a connection. Measured in seconds. Default value is 120.

Property:

harvester.harvestFrequency

Example Value:

harvester.harvestFrequency = 720

Informational Note:

How frequently the harvest scheduler checks the remote provider for updates. Should always be longer than _timePadding _. Measured in minutes. Default value is 720.

Property:

harvester.minHeartbeat

Example Value:

harvester.minHeartbeat = 30

Informational Note:

The heartbeat is the frequency at which the harvest scheduler queries the local database to determine if any collections are due for a harvest cycle (based on the harvestFrequency) value. The scheduler is optimized to then sleep until the next collection is actually ready to be harvested. The minHeartbeat and maxHeartbeat are the lower and upper bounds on this timeframe. Measured in seconds. Default value is 30.

Property:

harvester.maxHeartbeat

Example Value:

harvester.maxHeartbeat = 3600

Informational Note:

The heartbeat is the frequency at which the harvest scheduler queries the local database to determine if any collections are due for a harvest cycle (based on the harvestFrequency) value. The scheduler is optimized to then sleep until the next collection is actually ready to be harvested. The minHeartbeat and maxHeartbeat are the lower and upper bounds on this timeframe. Measured in seconds. Default value is 3600 (1 hour).

Property:

harvester.maxThreads

Example Value:

harvester.maxThreads = 3

Informational Note:

How many harvest process threads the scheduler can spool up at once. Default value is 3.

Property:

harvester.threadTimeout

Example Value:

harvester.threadTimeout = 24

Informational Note:

How much time passes before a harvest thread is terminated. The termination process waits for the current item to complete ingest and saves progress made up to that point. Measured in hours. Default value is 24.

Property:

harvester.unknownField

Example Value:

_harvester.unkownField = fail

add

ignore_ }}

Informational Note:

You have three (3) choices. When a harvest process completes for a single item and it has been passed through ingestion crosswalks for ORE and its chosen descriptive metadata format, it might end up with DIM values that have not been defined in the local repository. This setting determines what should be done in the case where those DIM values belong to an already declared schema. Fail will terminate the harvesting task and generate an error. Ignore will quietly omit the unknown fields. Add will add the missing field to the local repository's metadata registry. Default value: fail.

Property:

harvester.unknownSchema

Example Value:

_harvester.unknownSchema = fail

add

ignore_ }}

Informational Note:

When a harvest process completes for a single item and it has been passed through ingestion crosswalks for ORE and its chosen descriptive metadata format, it might end up with DIM values that have not been defined in the local repository. This setting determines what should be done in the case where those DIM values belong to an unknown schema. Fail will terminate the harvesting task and generate an error. Ignore will quietly omit the unknown fields. Add will add the missing schema to the local repository's metadata registry, using the schema name as the prefix and "unknown" as the namespace. Default value: fail.

Property:

harvester.acceptedHandleServer

Example Value:

Informational Note:

A harvest process will attempt to scan the metadata of the incoming items (identifier.uri field, to be exact) to see if it looks like a handle. If so, it matches the pattern against the values of this parameter. If there is a match the new item is assigned the handle from the metadata value instead of minting a new one. Default value: hdl.handle.net.

Property:

harvester.rejectedHandlePrefix

Example Value:

harvester.rejectedHandlePrefix = 123456789, myeduHandle

Informational Note:

Pattern to reject as an invalid handle prefix (known test string, for example) when attempting to find the handle of harvested items. If there is a match with this config parameter, a new handle will be minted instead. Default value: 123456789.

Property:

solr.log.server

Example Value:

solr.log.server = ${dspace.baseUrl}/solr/statistics

Informational Note:

Is used by the SolrLogger Client class to connect to the SOLR server over http and perform updates and queries.

Property:

solr.spidersfile

Example Value:

solr.spidersfile = ${dspace.dir}/config/spiders.txt

Informational Note:

Spiders file is utilized by the SolrLogger, this will be populated by running the following command:dsrun org.dspace.statistics.util.SpiderDetector -i <httpd log file>

Property:

solr.dbfile

Example Value:

solr.dbfile = ${dspace.dir}/config/GeoLiteCity.dat

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="55574676ab8aaae8-f77dd859-4bd9459a-b955a701-70ed3acabdd08e777deea508"><ac:plain-text-body><![CDATA[

Informational Note:

The following refers to the GeoLiteCity database file utilized by the LocationUtils to calculate the location of client requests based on IP address. During the Ant build process (both fresh_install and update) this file will be downloaded from [http://www.maxmind.com/app/geolitecity] if a new version has been published or it is absent from your [dspace]/config directory.

]]></ac:plain-text-body></ac:structured-macro>

Property:

solr.resolver.timeout

Example Value:

solr.resolver.timeout = 200

Informational Note:

Timeout for the resolver in the dns lookup time in milliseconds, defaults to 200 for backward compatibility; your systems default is usually set in /etc/resolv.conf and varies between 2 to 5 seconds, to high a value might result in solr exhausting your connection pool.

Property:

statistics.item.authorization.admin

Example Value:

statistics.item.authorization.admin = true

Informational Note:

Enables access control restriction on DSpace Statistics pages, Restrictions are based on access rights to Community, Collection and Item Pages. This will require the user to sign on to see that statistics. Setting the statistics to "false" will make them publicly available.

Property:

solr.statistics.logBots

Example Value:

{{solr.statistics.logBots = true }}

Informational Note:

Enable/disable logging of spiders in solr statistics. If false, and IP matches an address in solr.spiderips.urls, event is not logged. If true, event will be logged with the 'isBot' field set to true (see solr.statistics.query.filter.* for query filter options) Default value is true.

Property:

solr.statistics.query.filter.spiderIp

Example Value:

solr.statistics.query.filter.spiderIp = false

Informational Note:

Controls solr statistics querying to filter out spider IPs. False by default.

Property:

{{solr.statistics.query.filter.isBot }}

Example Value:

solr.statistics.query.filter.isBot = true

Informational Note:

Controls solr statistics querying to look at "isBot" field to determin if record is a bot. True by default.

Property:

solr.spiderips.urls

Example Value:

Informational Note:

URLs to download IP addresses of search engine spiders from

Properties:

sword.mets-ingester.package-ingester

Example Value:

sword.mets-ingester.package-ingester = METS

Informational Note:

The property key tell the SWORD METS implementation which package ingester to use to install deposited content. This should refer to one of the classes configured for:

                        plugin.named.org.dspace.content.packager.PackageIngester

The value of sword.mets-ingester.package-ingester tells the system which named plugin for this interface should be used to ingest SWORD METS packages.

Properties:

mets.submission.crosswalk.EPDCX

Example Value:

mets.submission.crosswalk.EPDCX = SWORD

Informational Note:

Define the metadata type EPDCX (EPrints DC XML)to be handled by the SWORD crosswalk configuration.

Properties:

crosswalk.submission.SWORD.stylesheet

Example Value:

crosswalk.submission.SWORD.stylesheet = crosswalks/sword-swap-ingest.xsl

Informational Note:

Define the stylesheet which will be used by the self-named XSLTIngestionCrosswalk class when asked to load the SWORD configuration (as specified above). This will use the specified stylesheet to crosswalk the incoming SWAP metadata to the DIM format for ingestion.

Properties:

sword.deposit.url

Example Value:

_sword.deposit.url = http://www.myu.ac.uk/sword/deposit_

Informational Note:

The base URL of the SWORD deposit. This is the URL from which DSpace will construct the deposit location urls for collections. The default is {dspace.url}/sword/deposit. In the event that you are not deploying DSpace as the ROOT application in the servlet container, this will generate incorrect URLs, and you should override the functionality by specifying in full as shown in the example value.

Properties:

_sword.servicedocument.url _ }}

Example Value:

_sword.servicedocument.url = http://www.myu.ac.uk/sword/servicedocument_

Informational Note:

The base URL of the SWORD service document. This is the URL from which DSpace will construct the service document location urls for the site, and for individual collections. The default is {dspace.url}/sword/servicedocument . In the event that you are not deploying DSpace as the ROOT application in the servlet container, this will generate incorrect URLs, and you should override the functionality by specifying in full as shown in the example value.

Properties:

sword.media-link.url

Example Value:

_sword.media-link.url = http://www.myu.ac.uk/sword/media-link_

Informational Note:

The base URL of the SWORD media links. This is the URL which DSpace will use to construct the media link urls for items which are deposited via sword. The default is {dspace.url}/sword/media-link. In the event that you are not deploying DSpace as the ROOT application in the servlet container, this will generate incorrect URLs, and you should override the functionality by specifying in full as shown in the example value.

Properties:

sword.generator.url

Example Value:

_sword.generator.url = http://www.dspace.org/ns/sword/1.3.1_

Informational Note:

The URL which identifies the sword software which provides the sword interface. This is the URL which DSpace will use to fill out the atom:generator element of its atom documents. The default is: _http://www.dspace.org/ns/sword/1.3.1_. If you have modified your sword software, you should change this URI to identify your own version. If you are using the standard dspace-sword module you will not, in general, need to change this setting.

Properties:

sword.updated.field

Example Value:

sword.updated.field = dc.date.updated

Informational Note:

The metadata field in which to store the updated date for items deposited via SWORD.

Properties:

sword.slug.field

Example Value:

sword.slug.field = dc.identifier.slug

Informational Note:

The metadata field in which to store the value of the slug header if it is supplied.

Properties:

Example Value:

_(See example below) _ }}

Informational Note:

The accept packaging properties, along with their associated quality values where appropriate. This is a Global Setting; these will be used on all DSpace collections

Properties:

Example Value:

(See example below)

Informational Note:

Collection Specific settings: these will be used on the collections with the given handles.

Properties:

sword.expose-items

Example Value:

sword.expose-items = false

Informational Note:

Should the server offer up items in collections as sword deposit targets. This will be effected by placing a URI in the collection description which will list all the allowed items for the depositing user in that collection on request. NOTE: this will require an implementation of deposit onto items, which will not be forthcoming for a short while.

Properties:

sword.expose-communities

Example Value:

sword.expose-communities = false

Informational Note:

Should the server offer as the default the list of all Communities to a Service Document request. If false, the server will offer the list of all collections, which is the default and recommended behavior at this stage. NOTE: a service document for Communities will not offer any viable deposit targets, and the client will need to request the list of Collections in the target before deposit can continue.

Properties:

sword.max-upload-size

Example Value:

sword.max-upload-size = 0

Informational Note:

The maximum upload size of a package through the sword interface, in bytes. This will be the combined size of all the files, the metadata and any manifest data. It is NOT the same as the maximum size set for an individual file upload through the user interface. If not set, or set to 0, the sword service will default to no limit.

Properties:

sword.keep-original-package

Example Value:

sword.keep-original-package = true

Informational Note:

Whether or not DSpace should store a copy of the original sword deposit package. NOTE: this will cause the deposit process to run slightly slower, and will accelerate the rate at which the repository consumes disk space. BUT, it will also mean that the deposited packages are recoverable in their original form. It is strongly recommended, therefore, to leave this option turned on. When set to "true", this requires that the configuration option upload.temp.dir above is set to a valid location.

Properties:

sword.bundle.name

Example Value:

sword.bundle.name = SWORD

Informational Note:

The bundle name that SWORD should store incoming packages under if sword.keep-original-package is set to true. The default is "SWORD" if not value is set

Properties:

sword.identify-version

Example Value:

sword.identify-version = true

Informational Note:

Should the server identify the sword version in a deposit response. It is recommended to leave this unchanged.

Properties:

sword.on-behalf-of.enable

Example Value:

sword.on-behalf-of.enable = true

Informational Note:

Should mediated deposit via sword be supported. If enabled, this will allow users to deposit content packages on behalf of other users.

Properties:

Example Value:

(See example below)

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="ef78560ac88eca79-7555d98b-45a24d78-bb8faa29-07d1b37ddb5f77d55b9b6bee"><ac:plain-text-body><![CDATA[

Informational Note:

Configure the plugins to process incoming packages. The form of this configuration is as per the Plugin Manager's Named Plugin documentation: plugin.named.[interface] = [implementation] = [package format identifier] _ . Package ingesters should implement the SWORDIngester interface, and will be loaded when a package of the format specified above in: _sword.accept-packaging.[package format].identifier = [package format identifier] is received. In the event that this is a simple file deposit, with no package format, then the class named by "SimpleFileIngester" will be loaded and executed where appropriate. This case will only occur when a single file is being deposited into an existing DSpace Item.

]]></ac:plain-text-body></ac:structured-macro>

Properties:

sword.accepts

Example Value:

sword.accepts = application/zip, foo/bar

Informational Note:

A comma separated list of MIME types that SWORD will accept.