Page History
...
The primary way of configuring DSpace is to edit the dspace.cfg. You will definitely have to do this before you can run DSpace properly. dspace.cfg contains basic information about a DSpace installation, including system path information, network host information, and other like items. To assist you in this endeavor, below is a place for you to write down some of the preliminary data so that you may facilitate faster configuration.
...
- Server IP:___________________
...
- Host Name (Server name)____________________
...
- dspace.url____________________
...
- Administrator's email:____________________
...
- handle prefix:____________________
...
- assetstore directory:____________________
...
- SMTP server:_______________________________
The dspace.cfg file
Below is a brief "Properties" table for the dspace.cfg file and the documented details are referenced. Please refer to those sections for the complete details of the parameter you are working with.
...
Property: | assetstore.dir | ||
Example Value: | assetstore.dir = ${dspace.dir}/assetstore | ||
Informational Note: | This is Asset (bitstream) store number 0 (Zero). You need not place your assetstore under the /dspace directory, but may want to place it on a different logical volume on the server that DSpace resides. So, you might have something like this: _ assetstore.dir = /storevgm/assestore_. | ||
Property: |
| ||
Example Value: |
| ||
Informational Note: | This property specifies extra asset stores like the one above, counting from one (1) upwards. This property is commented out (#) until it is needed. | ||
Property: | assetstore.incoming | ||
Example Value: | assetstore.incoming = 1 | ||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="d265195f21031fda-f684b83c-46224676-bf62b100-fba4ad9cb8e286e0e8bbc637"><ac:plain-text-body><![CDATA[ | Informational Note: | Informational Note: Specify the number of the store to use for new bitstreams with this property. The default is 0 [zero] which corresponds to the 'assestore.dir' above. As the asset store number is stored in the item metadata (in the database), always keep the assetstore numbering consistent and don't change the asset store number in the item metadata. | ]]></ac:plain-text-body></ac:structured-macro> |
...
Standard LDAP Configuration | |||
Property: | ldap.enable | ||
Example Value: | ldap.enable = false | ||
Informational Note: | This setting will enable or disable LDAP authentication in DSpace. With the setting off, users will be required to register and login with their email address. With this setting on, users will be able to login and register with their LDAP user ids and passwords. | ||
Property: | ldap.provider_url | ||
Example Value: | ldap.provider_url = ldap://ldap.myu.edu/o=myu.edu | ||
Informational Note: | This is the url to your institution's LDAP server. You may or may not need the /o=myu.edu part at the end. Your server may also require the ldaps:// protocol. | ||
Property: | ldap.id_field | ||
Example Value: | ldap.id_field = uid | ||
Explanation: | This is the unique identifier field in the LDAP directory where the username is stored. | ||
Property: | ldap.object_context | ||
Example Value: | ldap.object_context = ou=people, o=myu.edu | ||
Informational Note: | This is the object context used when authenticating the user. It is appended to the ldap.id_field and username. For example uid=username,ou=people,o=myu.edu. You will need to modify this to match your LDAP configuration. | ||
Property: | ldap.search_context | ||
Example Value: | ldap.search_context = ou=people | ||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="1f659fe7477fa876-683a7467-457545bd-8ec3acc3-11895c89a1a0f1367a8eab25"><ac:plain-text-body><![CDATA[ | Informational Note: | This is the search context used when looking up a user's LDAP object to retrieve their data for autoregistering. With ldap.autoregister turned on, when a user authenticates without an EPerson object we search the LDAP directory to get their name and email address so that we can create one for them. So after we have authenticated against uid=username,ou=people,o=byu.edu we now search in ou=people for filtering on [uid=username]. Often the ldap.search_context is the same as the ldap.object_context parameter. But again this depends on your LDAP server configuration. | ]]></ac:plain-text-body></ac:structured-macro> |
Property: | ldap.email_field | ||
Example Value: | ldap.email_field = mail | ||
Informational Note: | This is the LDAP object field where the user's email address is stored. "mail" is the default and the most common for ldap servers. If the mail field is not found the username will be used as the email address when creating the eperson object. | ||
Property: | ldap.surname_field | ||
Example Value: | ldap.surname_field = sn | ||
Informational Note: | This is the LDAP object field where the user's last name is stored. "sn" is the default and is the most common for LDAP servers. If the field is not found the field will be left blank in the new eperson object. | ||
Property: | ldap.givenname_field | ||
Example Value: | ldap.givenname_field = givenName | ||
Informational Note: | This is the LDAP object field where the user's given names are stored. I'm not sure how common the givenName field is in different LDAP instances. If the field is not found the field will be left blank in the new eperson object. | ||
Property: | ldap.phone_field | ||
Example Value: | ldap.phone_field = telephoneNumber | ||
Informational Note: | This is the field where the user's phone number is stored in the LDAP directory. If the field is not found the field will be left blank in the new eperson object. | ||
Property: | webui.ldap.autoregister | ||
Example Value: | webui.ldap.autoregister = true | ||
Informational Note: | This will turn LDAP autoregistration on or off. With this on, a new EPerson object will be created for any user who successfully authenticates against the LDAP server when they first login. With this setting off, the user must first register to get an EPerson object by entering their ldap username and password and filling out the forms. | ||
LDAP Users Group | |||
Property: | ldap.login.specialgroup | ||
Example Value: | ldap.login.specialgroup = group-name | ||
Informational Note: | If required, a group name can be given here, and all users who log into LDAP will automatically become members of this group. This is useful if you want a group made up of all internal authenticated users. (Remember to log on as the administrator, add this to the "Groups" with read rights). |
...
Properties: |
| ||
Example Values: |
| ||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="9da80858532e63e0-92ffab63-443749f7-b1e7bd23-ca849d1bbd233461e0ab4fad"><ac:plain-text-body><![CDATA[ | Informational Note: | This defines a crosswalk named MODS whose configuration comes from the file [dspace]/config/crosswalks/mods.properties. (In the above example, the lower-case name was added for OAI-PMH) | ]]></ac:plain-text-body></ac:structured-macro> |
...
Property: | webui.browse.thubnail.show | ||
Example Value: | webui.browse.thubnail.show = true | ||
Informational Note: | Controls whether to display thumbnails on browse and search result pages. If you have customized the Browse columnlist, then you must also include a "thumbnail" column in your configuration. (This configuration property key is not used by XMLUI. To show thumbnails using XMLUI, you need to create a theme which displays them). | ||
Property: | webui.browse.thumbnail.maxheight | ||
Example Value: | webui.browse.thumbnail.maxheight = 80 | ||
Informational Note: | This property determines the maximum height of the browse/search thumbnails in pixels (px). This only needs to be set if the thumbnails are required to be smaller than the dimensions of thumbnails generated by MediaFilter. | ||
Property: | webui.browse.thumbnail.maxwidth | ||
Example Value: | webui.browse.thumbnail.maxwidth = 80 | ||
Informational Note: | This determines the maximum width of the browse/search thumbnails in pixels (px). This only needs to be set if the thumbnails are required to be smaller than the dimensions of thumbnails generated by MediaFilter. | ||
Property: | webui.item.thumbnail.show | ||
Example Value: | webui.item.thumbnail.show = true | ||
Informational Note: | This determines whether or not to display the thumbnail against each bitstream. (This configuration property key is not used by XMLUI. To show thumbnails using XMLUI, you need to create a theme which displays them). | ||
Property: | webui.browse.thumbnail.linkbehavior | ||
Example Value: | webui.browse.thumbnail.linkbehavior = item | ||
Informational Note: | This determines where clicks on the thumbnail in browse and search screens should lead. The only values currently supported are "item" or "bitstream", which will either take the user to the item page, or directly download the bitstream. | ||
Property: | thumbnail.maxwidth | ||
Example Value: | __thumbnail.maxwidth = 80 | ||
Informational Note: | This property sets the maximum width of generated thumbnails that are being displayed on item pages. | ||
Property: | thumbnail.maxheight | ||
Example Value: | thumbnail.maxheight = 80 | ||
Informational Note: | This property sets the maximum height of generated thumbnails that are being displayed on item pages. | ||
Property: | webui.preview.enabled | ||
Example Value: | webui.preview.enabled = false | ||
Informational Note: | Whether or not the user can "preview" the image. | ||
Property: | webui.preview.maxwidth | ||
Example Value: | webui.preview.maxwidth = 600 | ||
Informational Note: | This property sets the maximum width for the preview image. | ||
Property: | webui.preview.maxheight | ||
Example Value: | webui.preview.maxheight = 600 | ||
Informational Note: | This property sets the maximum height for the preview image. | ||
Property: | webui.preview.brand | ||
Example Value: | webui.preview.brand = My Institution Name | ||
Informational Note: | This is the brand text that will appear with the image. | ||
Property: | webui.preview.brand.abbrev | ||
Example Value: | webui.preview.brand.abbrev = MyOrg | ||
Informational Note: | An abbreviated form of the full Branded Name. This will be used when the preview image cannot fit the normal text. | ||
Property: | webui.preview.brand.height | ||
Example Value: | webui.preview.brand.height = 20 | ||
Informational Note: | The height (in px) of the brand. | ||
Property: | webui.preview.brand.font | ||
Example Value: | webui.preview.brand.font = SanSerif | ||
Informational Note: | This property sets the font for your Brand text that appears with the image. | ||
Property: | webui.preview.brand.fontpoint | ||
Example Value: | webui.preview.brand.fontpoint = 12 | ||
Informational Note: | This property sets the font point (size) for your Brand text that appears with the image. | ||
Property: | webui.preview.dc | ||
Example Value: | webui.preview.dc = rights | ||
Informational Note: | The Dublin Core field that will display along with the preview. This field is optional. | ||
Property: | webui.strengths.show | ||
Example Value: | webui.strengths.show = false | ||
Informational Note: | Determines if communities and collections should display item counts when listed. The default behavior if omitted, is true. (This configuration property key is not used by XMLUI. To show thumbnails using XMLUI, you need to create a theme which displays them). | ||
Property: | webui.strengths.cache | ||
Example Value: | webui.strengths.cache = false | ||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="09fbeeabe1ab7c38-115ac177-418c440c-8d98b4f2-5b3ff08662cf97170c149f10"><ac:plain-text-body><![CDATA[ | Informational Note: | When showing the strengths, should they be counted in real time, or fetched from the cache. Counts fetched in real time will perform an actual count of the database contents every time a page with this feature is requested, which will not scale. If you set the property key is set to cache ("true") you must run the following command periodically to update the count: /[dspace]/bin/dspace itemcounter. The default is to count in real time (set to "false"). | ]]></ac:plain-text-body></ac:structured-macro> |
...
Property: | webui.licence_bundle.show | |||
Example Value: | webui.licence_bundle.show = false | |||
Informational Note: | Sets whether to display the contents of the license bundle (often just the deposit license in the standard DSpace installation). | |||
Property: | webui.itemdisplay.default | |||
Example Value: | (See example below) | |||
| ||||
Informational Note: | This is used to customize the DC metadata fields that display in the item display (the brief display) when pulling up a record. The format is: <schema>.<element>.<optionalqualifier> In place of the qualifier, one can use the wildcard "" to include all fields of the same element, or, leave it blank for unqualified elements. Additionally, two additional options are available for behavior/rendering: (date) and (link). See the following examples: dc.title = Dublin Core element 'title' (unqualified)dc.title.alternative = DC element 'title', qualifier 'alternative'dc.title. = All fields with Dublin Core element 'title' (any or no qualifier)dc.identifier.uri(link) = DC identifier.uri, rendered as a link_dc.date.issued(date)_ = DC date.issued, rendered as a dateThe Messages.properties file controls how the fields defined above will display to the user. If the field is missing from the Messages.properties_file, it will not be display. Look in _Messages.properties under metadata.dc.<field>. Example:
Please note: The order in which you place the values to the property key control the order in which they will display to the user on the outside world. (See the Example Value above). | |||
Property: |
| |||
Example Value: |
| |||
Informational Note: | When using "resolver" in webui.itemdisplay to render identifiers as resolvable links, the base URL is take from <code>webui.resolver.<n>.baseurl<code> where <code>webui.resolver.<n>.baseurl<code> matches the urn specified in the metadata value. The value is appended to the "baseurl" as is, so the baseurl needs to end with the forward slash almost in any case. If no urn is specified in the value it will be displayed as simple text.For the doi and hdl urn defaults values are provided, respectively http://dc.doi.org and http://hdl.handle.net are used.If a metadata value with style "doi", "handle" or "resolver" matches a URL already, it is simply rendered as a link with no other manipulation. | |||
Property: | plugin.single.org.dspace.app.webui.util.StyleSelection | |||
Example Value: |
| |||
Informational Note: | Specify which strategy to use for select the style for an item. | |||
Property: | webui.itemdisplay.thesis.collections | |||
Example Value: | webui.itemdisplay.thesis.collections = 123456789/24, 123456789/35 | |||
Informational Note: | Specify which collections use which views by Handle. | |||
Property: |
| |||
Example Value: |
| |||
Informational Note: | Specify which metadata to use as name of the style | |||
Property: | webui.itemlist.columns | |||
Example Value: |
| |||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="5961f4960b3812d3-809e8052-45c54d55-9029b4a4-05b8c399d703ee5d3186b7fc"><ac:plain-text-body><![CDATA[ | Informational Note: | Customize the DC fields to use in the item listing page. Elements will be displayed left to right in the order they are specified here. The form is <schema prefix>.<element>[.<qualifier> | .][(date)], ... Although not a requirement, it would make sense to include among the listed fields at least the date and title fields as specified by the webui.browse.index. configuration options in the next section mentioned. (cf.)If you have enabled thumbnails (webui.browse.thumbnail.show), you must also include a 'thumbnail' entry in your columns—this is where the thumbnail will be displayed. | ]]></ac:plain-text-body></ac:structured-macro> |
Property: | webui.itemlist.width | |||
Example Value: | webui.itemlist.width = *, 130, 60%, 40% | |||
Informational Note: | You can customize the width of each column with the following line—you can have numbers (pixels) or percentages. For the 'thumbnail' column, a setting of '*' will use the max width specified for browse thumbnails (cf. webui.browse.thumbnail.maxwidth, thumbnail.maxwidth) | |||
Property: |
| |||
Example Value: | __ | |||
Informational Note: | You can override the DC fields used on the listing page for a given browse index and/or sort option. As a sort option or index may be defined on a field that isn't normally included in the list, this allows you to display the fields that have been indexed/sorted on.There are a number of forms the configuration can take, and the order in which they are listed below is the priority in which they will be used (so a combination of an index name and sort name will take precedence over just the browse name).In the last case, a sort option name will always take precedence over a browse index name. Note also, that for any additional columns you list, you will need to ensure there is an itemlist.<field name> entry in the messages file. | |||
Property: | webui.itemlist.dateaccessioned.columns | |||
Example Value: | webui.itemlist.dateaccessioned.columns = thumbnail, dc.date.accessioned(date), dc.title, dc.contributor.* | |||
Informational Note: | This would display the date of the accession in place f the issue date whenever the dateaccessioned browsed index or sort option is selected. Just like webui.itemlist.columns, you will need to include a 'thumbnail' entry to display the thumbnails in the item list. | |||
Property: | webui.itemlist.dateaccessioned.widths | |||
Example Value: | webui.itemlist.dateaccessioned.widths = *, 130, 60%, 40% | |||
Informational Note: | As in the aforementioned property key, you can customize the width of the columns for each configured column list, substituting '.widths' for '.columns' in the property name. See the setting for _webui.itemlist.widths_for more information. | |||
Property: | webui.itemlist.tablewidth | |||
Example Value: | webui.itemlist.tablewidth = 100% | |||
Informational Note: | You can also set the overall size of the item list table with the following setting. It can lead to faster table rendering when used with the column widths above, but not generally recommended. | |||
Property: | webui.session.invalidate | |||
Example Value: | webui.session.invalidate = true | |||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="f7b737d7fbd59fa2-731cfbee-438f49e9-bf63b86a-a7534bad86198b2e45ba0617"><ac:plain-text-body><![CDATA[ | Informational Note: | Enable or disable session invalidation upon login or logout. This feature is enabled by default to help prevent session hijacking but may cause problems for shibboleth, etc. If omitted, the default value is 'true'. [Only used for JSPUI authentication]. | ]]></ac:plain-text-body></ac:structured-macro> |
...
Property: | oai.didl.maxresponse | ||
Example Value: | oai.didle.maxresponse = 0 | ||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="32a9a54b6a302b4e-503c52de-4e6b4414-bed1bf1e-c1a6526a268a94d41676bb30"><ac:plain-text-body><![CDATA[ | Informational Note: | Max response size for DIDL. This is the maximum size in bytes of the files you wish to enclose Base64 encoded in your responses, remember that the base64 encoding process uses a lot of memory. We recommend at most 200000 for answers of 30 records each on a 1 Gigabyte machine. Ultimately this will change to a streaming model and remove this restriction. Also please remember to allocate plenty of memory, at least 512 MB to your Tomcat.Optional: DSpace uses 100 records as the limit for the oai responses. You can alter this by changing /[dspace-source]/dspace-oai/dspace-oai-api/src/main/java/org/dspace/app/oai/DSpaceOAICatalog.java to codify the declaration: private final int MAX_RECORDS = 100 to private final int MAX_RECORDS = 30 | ]]></ac:plain-text-body></ac:structured-macro> |
...
Property: | harvester.eperson | ||
Example Value: | harvester.eperson = admin@myu.edu | ||
Informational Note: | The EPerson under whose authorization automatic harvesting will be performed. This field does not have a default value and must be specified in order to use the harvest scheduling system. This will most likely be the DSpace admin account created during installation. | ||
Property: | dspace.oai.url | ||
Example Value: | _dspace.oai.url = http://myu.edu:8080/oai_ | ||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="97befa08058d85f1-fa7f134a-46144b8f-b995b65c-8e230fdf8df4801a7aeb5902"><ac:plain-text-body><![CDATA[ | Informational Note: | The base url of the OAI-PMH disseminator webapp (i.e. do not include the /request on the end). This is necessary in order to mint URIs for ORE Resource Maps. The default value of [http://$]{dspace.hostname}:8080/oai will work for a typical installation, but should be changed if appropriate. | ]]></ac:plain-text-body></ac:structured-macro> |
Property: | ore.authoritative.source | ||
Example Value: | _ore.authoritative.source = oai | xmlui_ | |
Informational Note: | The webapp responsible for minting the URIs for ORE Resource Maps. If using oai, the dspace.oai.uri config value must be set. The URIs generated for ORE ReMs follow the following convention for both cases.baseURI/metadata/handle/theHandle/ore.xml | ||
Property: | harvester.autoStart | ||
Example Value: | harvester.autoStart = false | ||
Informational Note: | Determines whether the harvest scheduler process starts up automatically when the XMLUI webapp is redeployed. | ||
Property: | harvester.oai.metadataformats.PluginName | ||
Example Value: |
| ||
Informational Note: | This field can be repeated and serves as a link between the metadata formats supported by the local repository and those supported by the remote OAI-PMH provider. It follows the form harvester.oai.metadataformats.PluginName = NamespaceURI,Optional Display Name . The pluginName designates the metadata schemas that the harvester "knows" the local DSpace repository can support. Consequently, the PluginName must correspond to a previously declared ingestion crosswalk. The namespace value is used during negotiation with the remote OAI-PMH provider, matching it against a list returned by the ListMetadataFormats request, and resolving it to whatever metadataPrefix the remote provider has assigned to that namespace. Finally, the optional display name is the string that will be displayed to the user when setting up a collection for harvesting. If omitted, the PluginName:NamespaceURI combo will be displayed instead. | ||
Property: | harvester.oai.oreSerializationFormat.OREPrefix | ||
Example Value: |
| ||
Informational Note: | This field works in much the same way as harvester.oai.metadataformats.PluginName . The OREPrefix must correspond to a declared ingestion crosswalk, while the Namespace must be supported by the target OAI-PMH provider when harvesting content. | ||
Property: | harvester.timePadding | ||
Example Value: | harvester.timePadding = 120 | ||
Informational Note: | Amount of time subtracted from the from argument of the PMH request to account for the time taken to negotiate a connection. Measured in seconds. Default value is 120. | ||
Property: | harvester.harvestFrequency | ||
Example Value: | harvester.harvestFrequency = 720 | ||
Informational Note: | How frequently the harvest scheduler checks the remote provider for updates. Should always be longer than _timePadding _. Measured in minutes. Default value is 720. | ||
Property: | harvester.minHeartbeat | ||
Example Value: | harvester.minHeartbeat = 30 | ||
Informational Note: | The heartbeat is the frequency at which the harvest scheduler queries the local database to determine if any collections are due for a harvest cycle (based on the harvestFrequency) value. The scheduler is optimized to then sleep until the next collection is actually ready to be harvested. The minHeartbeat and maxHeartbeat are the lower and upper bounds on this timeframe. Measured in seconds. Default value is 30. | ||
Property: | harvester.maxHeartbeat | ||
Example Value: | harvester.maxHeartbeat = 3600 | ||
Informational Note: | The heartbeat is the frequency at which the harvest scheduler queries the local database to determine if any collections are due for a harvest cycle (based on the harvestFrequency) value. The scheduler is optimized to then sleep until the next collection is actually ready to be harvested. The minHeartbeat and maxHeartbeat are the lower and upper bounds on this timeframe. Measured in seconds. Default value is 3600 (1 hour). | ||
Property: | harvester.maxThreads | ||
Example Value: | harvester.maxThreads = 3 | ||
Informational Note: | How many harvest process threads the scheduler can spool up at once. Default value is 3. | ||
Property: | harvester.threadTimeout | ||
Example Value: | harvester.threadTimeout = 24 | ||
Informational Note: | How much time passes before a harvest thread is terminated. The termination process waits for the current item to complete ingest and saves progress made up to that point. Measured in hours. Default value is 24. | ||
Property: | harvester.unknownField | ||
Example Value: | _harvester.unkownField = fail | add | ignore_ |
Informational Note: | You have three (3) choices. When a harvest process completes for a single item and it has been passed through ingestion crosswalks for ORE and its chosen descriptive metadata format, it might end up with DIM values that have not been defined in the local repository. This setting determines what should be done in the case where those DIM values belong to an already declared schema. Fail will terminate the harvesting task and generate an error. Ignore will quietly omit the unknown fields. Add will add the missing field to the local repository's metadata registry. Default value: fail. | ||
Property: | harvester.unknownSchema | ||
Example Value: | _harvester.unknownSchema = fail | add | ignore_ |
Informational Note: | When a harvest process completes for a single item and it has been passed through ingestion crosswalks for ORE and its chosen descriptive metadata format, it might end up with DIM values that have not been defined in the local repository. This setting determines what should be done in the case where those DIM values belong to an unknown schema. Fail will terminate the harvesting task and generate an error. Ignore will quietly omit the unknown fields. Add will add the missing schema to the local repository's metadata registry, using the schema name as the prefix and "unknown" as the namespace. Default value: fail. | ||
Property: | harvester.acceptedHandleServer | ||
Example Value: |
| ||
Informational Note: | A harvest process will attempt to scan the metadata of the incoming items (identifier.uri field, to be exact) to see if it looks like a handle. If so, it matches the pattern against the values of this parameter. If there is a match the new item is assigned the handle from the metadata value instead of minting a new one. Default value: hdl.handle.net. | ||
Property: | harvester.rejectedHandlePrefix | ||
Example Value: | harvester.rejectedHandlePrefix = 123456789, myeduHandle | ||
Informational Note: | Pattern to reject as an invalid handle prefix (known test string, for example) when attempting to find the handle of harvested items. If there is a match with this config parameter, a new handle will be minted instead. Default value: 123456789. |
...
Property: | solr.log.server | ||
Example Value: | solr.log.server = ${dspace.baseUrl}/solr/statistics | ||
Informational Note: | Is used by the SolrLogger Client class to connect to the SOLR server over http and perform updates and queries. | ||
Property: | solr.spidersfile | ||
Example Value: | solr.spidersfile = ${dspace.dir}/config/spiders.txt | ||
Informational Note: | Spiders file is utilized by the SolrLogger, this will be populated by running the following command:dsrun org.dspace.statistics.util.SpiderDetector -i <httpd log file> | ||
Property: | solr.dbfile | ||
Example Value: | solr.dbfile = ${dspace.dir}/config/GeoLiteCity.dat | ||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="a64092568ace1e4f-4b557933-408c45a9-b1ae9aa0-d5672eee6b9137de2042a818"><ac:plain-text-body><![CDATA[ | Informational Note: | The following refers to the GeoLiteCity database file utilized by the LocationUtils to calculate the location of client requests based on IP address. During the Ant build process (both fresh_install and update) this file will be downloaded from [http://www.maxmind.com/app/geolitecity] if a new version has been published or it is absent from your [dspace]/config directory. | ]]></ac:plain-text-body></ac:structured-macro> |
Property: | statistics.item.authorization.admin | ||
Example Value: | statistics.item.authorization.admin = true | ||
Informational Note: | Enables access control restriction on DSpace Statistics pages, Restrictions are based on access rights to Community, Collection and Item Pages. This will require the user to sign on to see that statistics. Setting the statistics to "false" will make them publicly available. |
...
Properties: | sword.mets-ingester.package-ingester | ||
Example Value: | sword.mets-ingester.package-ingester = METS | ||
Informational Note: | The property key tell the SWORD METS implementation which package ingester to use to install deposited content. This should refer to one of the classes configured for:
The value of sword.mets-ingester.package-ingester tells the system which named plugin for this interface should be used to ingest SWORD METS packages. | ||
Properties: | mets.submission.crosswalk.EPDCX | ||
Example Value: | mets.submission.crosswalk.EPDCX = SWORD | ||
Informational Note: | Define the metadata type EPDCX (EPrints DC XML)to be handled by the SWORD crosswalk configuration. | ||
Properties: | crosswalk.submission.SWORD.stylesheet | ||
Example Value: | crosswalk.submission.SWORD.stylesheet = crosswalks/sword-swap-ingest.xsl | ||
Informational Note: | Define the stylesheet which will be used by the self-named XSLTIngestionCrosswalk class when asked to load the SWORD configuration (as specified above). This will use the specified stylesheet to crosswalk the incoming SWAP metadata to the DIM format for ingestion. | ||
Properties: | sword.deposit.url | ||
Example Value: | _sword.deposit.url = http://www.myu.ac.uk/sword/deposit_ | ||
Informational Note: | The base URL of the SWORD deposit. This is the URL from which DSpace will construct the deposit location urls for collections. The default is {dspace.url}/sword/deposit. In the event that you are not deploying DSpace as the ROOT application in the servlet container, this will generate incorrect URLs, and you should override the functionality by specifying in full as shown in the example value. | ||
Properties: | _sword.servicedocument.url _ | ||
Example Value: | _sword.servicedocument.url = http://www.myu.ac.uk/sword/servicedocument_ | ||
Informational Note: | The base URL of the SWORD service document. This is the URL from which DSpace will construct the service document location urls for the site, and for individual collections. The default is {dspace.url}/sword/servicedocument . In the event that you are not deploying DSpace as the ROOT application in the servlet container, this will generate incorrect URLs, and you should override the functionality by specifying in full as shown in the example value. | ||
Properties: | sword.media-link.url | ||
Example Value: | _sword.media-link.url = http://www.myu.ac.uk/sword/media-link_ | ||
Informational Note: | The base URL of the SWORD media links. This is the URL which DSpace will use to construct the media link urls for items which are deposited via sword. The default is {dspace.url}/sword/media-link. In the event that you are not deploying DSpace as the ROOT application in the servlet container, this will generate incorrect URLs, and you should override the functionality by specifying in full as shown in the example value. | ||
Properties: | sword.generator.url | ||
Example Value: | _sword.generator.url = http://www.dspace.org/ns/sword/1.3.1_ | ||
Informational Note: | The URL which identifies the sword software which provides the sword interface. This is the URL which DSpace will use to fill out the atom:generator element of its atom documents. The default is: _http://www.dspace.org/ns/sword/1.3.1_. If you have modified your sword software, you should change this URI to identify your own version. If you are using the standard dspace-sword module you will not, in general, need to change this setting. | ||
Properties: | sword.updated.field | ||
Example Value: | sword.updated.field = dc.date.updated | ||
Informational Note: | The metadata field in which to store the updated date for items deposited via SWORD. | ||
Properties: | sword.slug.field | ||
Example Value: | sword.slug.field = dc.identifier.slug | ||
Informational Note: | The metadata field in which to store the value of the slug header if it is supplied. | ||
Properties: |
| ||
Example Value: | _(See example below) _ | ||
| |||
Informational Note: | The accept packaging properties, along with their associated quality values where appropriate. This is a Global Setting; these will be used on all DSpace collections | ||
Properties: |
| ||
Example Value: | (See example below) | ||
| |||
Informational Note: | Collection Specific settings: these will be used on the collections with the given handles. | ||
Properties: | sword.expose-items | ||
Example Value: | sword.expose-items = false | ||
Informational Note: | Should the server offer up items in collections as sword deposit targets. This will be effected by placing a URI in the collection description which will list all the allowed items for the depositing user in that collection on request. NOTE: this will require an implementation of deposit onto items, which will not be forthcoming for a short while. | ||
Properties: | sword.expose-communities | ||
Example Value: | sword.expose-communities = false | ||
Informational Note: | Should the server offer as the default the list of all Communities to a Service Document request. If false, the server will offer the list of all collections, which is the default and recommended behavior at this stage. NOTE: a service document for Communities will not offer any viable deposit targets, and the client will need to request the list of Collections in the target before deposit can continue. | ||
Properties: | sword.max-upload-size | ||
Example Value: | sword.max-upload-size = 0 | ||
Informational Note: | The maximum upload size of a package through the sword interface, in bytes. This will be the combined size of all the files, the metadata and any manifest data. It is NOT the same as the maximum size set for an individual file upload through the user interface. If not set, or set to 0, the sword service will default to no limit. | ||
Properties: | sword.keep-original-package | ||
Example Value: | sword.keep-original-package = true | ||
Informational Note: | Whether or not DSpace should store a copy of the original sword deposit package. NOTE: this will cause the deposit process to run slightly slower, and will accelerate the rate at which the repository consumes disk space. BUT, it will also mean that the deposited packages are recoverable in their original form. It is strongly recommended, therefore, to leave this option turned on. When set to "true", this requires that the configuration option upload.temp.dir above is set to a valid location. | ||
Properties: | sword.bundle.name | ||
Example Value: | sword.bundle.name = SWORD | ||
Informational Note: | The bundle name that SWORD should store incoming packages under if sword.keep-original-package is set to true. The default is "SWORD" if not value is set | ||
Properties: | sword.identify-version | ||
Example Value: | sword.identify-version = true | ||
Informational Note: | Should the server identify the sword version in a deposit response. It is recommended to leave this unchanged. | ||
Properties: | sword.on-behalf-of.enable | ||
Example Value: | sword.on-behalf-of.enable = true | ||
Informational Note: | Should mediated deposit via sword be supported. If enabled, this will allow users to deposit content packages on behalf of other users. | ||
Properties: |
| ||
Example Value: | (See example below) | ||
| |||
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="1e1be750105ec36b-77bff754-46264a8d-8fc78e83-3a942df83c82cca37eda9c4a"><ac:plain-text-body><![CDATA[ | Informational Note: | Configure the plugins to process incoming packages. The form of this configuration is as per the Plugin Manager's Named Plugin documentation: plugin.named.[interface] = [implementation] = [package format identifier] _ . Package ingesters should implement the SWORDIngester interface, and will be loaded when a package of the format specified above in: _sword.accept-packaging.[package format].identifier = [package format identifier] is received. In the event that this is a simple file deposit, with no package format, then the class named by "SimpleFileIngester" will be loaded and executed where appropriate. This case will only occur when a single file is being deposited into an existing DSpace Item. | ]]></ac:plain-text-body></ac:structured-macro> |
Properties: | sword.accepts | ||
Example Value: | sword.accepts = application/zip, foo/bar | ||
Informational Note: | A comma separated list of MIME types that SWORD will accept. |